Catalogs >
burster präzisionsmesstechnik gmbh & co kg >
Data sheet - Multichannel Amplifier For strain gauge sensors Model 9236

Data sheet - Multichannel Amplifier For strain gauge sensors Model 9236
2Pages

Catalog excerpts

Data sheet - Multichannel Amplifier For strain gauge sensors Model 9236 - 1

Multichannel Amplifier For strain gauge sensors Operates with up to 4 measuring channels Protected against reverse connection and short-circuit Also available as circuit board without housing Simple configuration using DIP switch High degree of protection up to IP67 Situations often occur in practice in which it is necessary to place a measuring amplifier immediately in the neighborhood of the sensor in order to be able to access a standard signal there. In this way, long distances to the evaluating electronics can be covered. The measuring amplifier itself is powered by voltages between 15 V and 30 V. Internally, the highly accurate, short-circuit protected sensor excitation voltage is generated and used to supply the sensor‘s measuring bridge. The input range of the amplifier is appropriate for sensitivities between 0.5 and 30 mV/V and is also suitable for semiconductor strain gauge. This task can ideally be performed by the 9236 in-line measuring amplifier. With its high degree of protection (IP67) its singlechannel version can be integrated into the application even in the tough environment outside the switch gear cabinet. In the multichannel version, up to four measuring channels can be implemented in one housing for the DIN carrier rail. This means that it can be located either in the switch gear cabinet, or in the immediate neighborhood of the sensor. Users who want to put the amplifier onto an existing circuit board or who wish to construct their own housing can also obtain the amplifier as an open circuit board. It can be integrated by means of screw terminals. The analog output voltage can be set to a range from 0 to ± 5 V or 0 to ± 10 V. DIP switches are used to set the input range. Fine adjustments and zero point setting are performed by means of multi-turn potentiometers that are mounted on the circuit board. The sensors are connected, and the auxiliary power supplied, through user-friendly screw terminals. The amplifier in the IP67 version can, if in fact necessary, be achieved by clamping, gluing, or with the aid of a cable tie. The open circuit board has mounting holes for easy assembly. The amplifier‘s limit frequency is 1 kHz. The 9236 measuring amplifier finds applications wherever the output signal from sensors based on wire strain gauges, such as force, pressure or torque sensors, must be converted into a voltage signal, e.g. ►► ►► ►► ►► Automatic production machinery Laboratory measurements Integration into customer‘s circuit boards Field measurements Technical changes reserved. All data sheets at www.burster.com burster praezisionsmesstechnik gmbh & co kg Germany www.burster.com Talstr. 1-5 . Gernsbach 76593 . Phone +49-7224-6450 info@bur

Open the catalog to page 1

Data sheet - Multichannel Amplifier For strain gauge sensors Model 9236 - 2

Technical Data Terminal assignment for mounting rail version, 2 channel Connectable sensors Strain gauges Bridge resistance: Connection technology: Excitation: Excitation current: Power consumption: Configurable characteristic: Default setting: Analog output Output voltage selectable: 0 ... ± 5 V / 0 ... ± 10 V (standard) selectable Output resistance: 440 Q General amplifier values Measurement error: 0.1 % F.S. Zero point: 25 % / 5 % (standard) of measurement range selectable Temperature coefficient: < 100 ppm/K Zero drift: < 0.4 |jV/K Current consumption: 20 mA / 1 channel Range of...

Open the catalog to page 2