burster Digital instrumentation amplifier for strain gage sensors with IO-Link interface MODEL 9210Highlights ■ Universal strain gage amplifier with lO-Link interface ■ Specified for use in harsh environments ■ IP65 degree of protection and high vibration resistance ■ Installation-friendly, ultra compact design ■ Mechanical and plant engineering ■ Assembly and joining equipment ■ Measuring cell expansion during battery production The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface - a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector. The high-grade amplifier electronics enable precise measurements with a non-linearity of < 0.005 % F.S. 24-bit A/D conversion ensures that the digital signals have sufficient resolution. The new strain gage amplifier with IO-Link interface enables immense flexibility. With a suitable choice of IO-Link master, the instrumentation amplifier can be integrated into almost any fieldbus network. Depending on how many ports the master module provides, multi-channel measurement tasks can be implemented simply and cost-effectively. burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Electrical connection Electrical connection sensor end Electrical connection control end Block diagram burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Example orderOrder number 8431-6002-N0D0S000 Precision miniature tension & compression load cell with fitted M8 connector 92ABG Calibration of measuring chain 9210-V000 Strain gage amplifier with IO-Link interface burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com