Data Sheet Model 9186/8532
2Pages

{{requestButtons}}

Catalog excerpts

Data Sheet Model 9186/8532 - 1

For basic force measurements Digital indicator model 9186 and load cell model 8532 Measuring ranges from 0 ... 500 N to 0 ... 20 kN Extremely economical force indicator Compact sensor design Threaded holes for easy assembly Very good visual indication via 20 mm display Up to 2 limit values optionally possible Optionally as built-in or bench top housing Measuring chain is trimmed and ready for immediate use The force measuring chain has been developed for applications where the requirements for precision are not the primary focus, but rather where an economical purchase price and simple functionality are the key criteria. The sensor‘s strain gauge technology allows both static and dynamically changing forces to be measured. The large display means that the force acting on the sensor can be read easily. The four integrated threaded holes allow the sensor to be integrated quickly and easily into existing production and assembly equipment. The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. A full-bridge strain gauge is used as the measuring element inside the sensor, by means of which the force to be measured is converted into a proportional electrical voltage. This is indicated as a force on the display. It has been possible to implement this extremely economical digital indicator through the use of the latest microprocessor technology. The simplicity of operation and adjustment need hardly be explained. The self-explanatory abbreviations allow even an inexperienced user to configure the device in a very short time. Typical applications include ►► Testing the strength of welded joints ►► Sports medicine ►► Monitoring the clamping force of hose connections Technical changes reserved. All data sheets at www.burster.com burster praezisionsmesstechnik gmbh & co kg Germany Talstr. 1-5 . Gernsbach 76593 . Phone +49-7224-6450 www.burster.com info@burster.com Low-Cost Meas

Open the catalog to page 1
Data Sheet Model 9186/8532 - 2

Technical Data Technical Data Digital indicator model 9186 Compressive load cell model 8532 Strain gauge Connection technology: 4 wire Bridge resistance: 120 ... 1000 Ω Bridge voltage: 30 V / 300 mV choice per Menu Sensor excitation: 5 V / 30 mA 10 V / 30 mA Measurement range: Bridge resistance: Accuracy: Operation temperature range: Protection class accord. to EN 60529: Length of cable: General data Measurement error: Display: Measurement rate: Protection class front panel: Please refer to data sheet 8532, for further information. 0,1 % F. S. ± 4 Digit - 1999 ... + 9999 25/s IP65 Standard...

Open the catalog to page 2

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

  1. Load cells

    25 Pages

  2. Load cells

    25 Pages

  3. Torque Sensors

    16 Pages

  4. Load-cell

    25 Pages

  5. Load-cell

    25 Pages