Delivery: ex stock | Warranty: 24 months Highlights ■ Measuring ranges from 0 ... 5 N-m up to 0 ... 1000 N-m ■ Standardized output signal ■ Tare function, filter and average values configurable ■ Very high permitted axial load ■ Test setups for precision mechanics ■ Measuring reaction torques for motors ■ Measuring car-seat adjustment torques ■ Measuring operating torques for door release mechanisms This high-precision torque sensor is designed for both static and dynamic measurements on non-rotating parts. The through-hole can be used to feed parts such as cables or Bowden cables through the sensor. The mounting flanges contain threaded holes and through-holes so that the sensor can be fitted at either end. With no rotating parts, this sensor needs no maintenance when used correctly. The modular design of this strain-gage sensor allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function. With the USB option, in addition to the voltage output, the measurement function is available via USB as well. The sensor comes with the DigiVision software for performing measurements and data archiving, with drivers additionally available e.g. for LabVIEW. Integration into custom software is possible via DLL. Examples can be found on our website www.burster.com The burster TEDS option (electronic data sheet, memory chip with sensor-specific data) allows rapid configuration of compatible evaluation units (instrumentation amplifier, indicator, ...). burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Housing: made of anodized aluminium Shaft: steel shell 1.4542 Protection class burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Integrated ampifier with USB interface Dual-range version This sensor model comes with a USB port in addition to the 0 ... ± 10 V output. Two versions are available: ■ ± 10 V output signal, USB used solely for configuration ■ ± 10 V output signal, USB used for both configuration and measurement When a USB-based measurement is launched, the analog output signal is disabled because it is not possible to use both forms of output simultaneously. With both versions, the measurement signal can be tared, averaged or filtered. These functions can be set up and/or activated via USB and the free version...

burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com