Data Sheet Model 8630
6Pages

{{requestButtons}}

Catalog excerpts

Data Sheet Model 8630 - 1

Delivery: ex stock | Warranty: 24 months High Precision Torque Sensor for non-rotating applications MODEL 8630 Highlights M easuring ranges from 0 ... 2 N.m up to 0 ... 200 N.m Linearity error ≤ 0,1 % F.S. Internal square and external square S tandardized output signal T are function, filter and average values configurable Insensitive to side loads thanks to built-in support bearing Options Output signal ±10 V / USB burster TEDS Bracket or flange adapter offers choice of mounting options Dual-range model Applications Testing screw-fastening tools L ogging data for specified release torques M easuring the tightening torque of screw connections Acquisition of breakage moments on screw caps Product description This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications. Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings. With no rotating parts, this sensor needs no maintenance when used correctly. Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches. The strain-gauge based sensor’s modular design allows precise configuration for the desired application. Model 8630 with USB interface With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function. Measurements via USB in addition to the voltage output are available with the USB measurement option. The sensor comes with the DigiVision software for performing measurements and data archiving, with drivers additionally available e.g. for LabVIEW. Integration into custom software is possible via DLL. Examples can be found on our website www.burster.com The burster TEDS option (electronic data sheet, memory chip with sensor-specific data) allows rapid configuration of compatible evaluation units (instrumentation amplifier, indicator, ...). burster Sensors and Process Instruments – Technical changes reserved. All data sheets at www.burste

Open the catalog to page 1
Data Sheet Model 8630 - 2

Housing: made of anodized aluminium Shaft: steel shell 1.4542 Protection class Weight [g] 139 Higher measuring ranges on request. burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 2
Data Sheet Model 8630 - 3

burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 3
Data Sheet Model 8630 - 4

The flange adapter allows easy integration of the sensor in existing equipment with a flange connection. When ordered with the sensor, the flange adapter comes pre-fitted; please refer to order code. Alternatively it can be ordered separately as an accessory. Please refer to the accessories data sheet 8600-Z00X. The bracket provides a quick-to-fit and stable fixture for the sensor. When ordered with the sensor, the bracket comes prefitted; please refer to order code. Alternatively it can be ordered separately as an accessory. Please refer to the accessories data sheet 8600-Z001. Dual-range...

Open the catalog to page 4
Data Sheet Model 8630 - 5

Order code Special calibration for clockwise or/and counter clockwise direction torque, in 20 % steps of range up and down DAkkS calibration certificate per DIN 51309, clockwise and/or anticlockwise torque, with eight steps spaced across the measurement range, increasing and decreasing. burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 5
Data Sheet Model 8630 - 6

Order Code Measuring Range Output signals Output voltage 10 V incl. configuration USB Output voltage 10 V incl. USB configuring and measuring USB Output signal standardized, mV/V Output signal, mV/V with TEDS burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 6

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

  1. Load cells

    25 Pages

  2. Load cells

    25 Pages

  3. Torque Sensors

    16 Pages

  4. Load-cell

    25 Pages

  5. Load-cell

    25 Pages