Data Sheet Model 8527
7Pages

{{requestButtons}}

Catalog excerpts

Data Sheet Model 8527 - 1

Delivery: ex stock | Warranty: 24 months burster High Precision Compression Load Cell Highlights ■ Measuring ranges from 0 ... 500 N to 0 ... 100 kN ■ Non-linearity 0.035 % F.S. ■ Highest manufacturing quality ■ Also suitable for dynamic measurements Options WKS (Factory Calibration Certificate) or DAkkS (German Accreditation Body) calibration burster TEDS Applications Reference measurements Calibration facilities Test benches All areas of mechanical engineering 0.035 % F.S. Product description The model 8527 high-precision compression load cell is the ideal load cell for reference measurement chains where highly precise measurement results are required. Its very high production quality and extremely low non-linearity of just 0.035 % F.S. make it a dependable choice for comparative measurements and calibration tasks Designed for a dynamic stress of up to 100 % of the full scale value, the model 8527 load cell is also suitable for situations where a rapid signal change with high amplitude occurs and has to be measured. The model 8527 high-precision compression load cell has a domed load button on top, onto which the compressive load being measured is applied. Inside the load cell is an elastic membrane, on which strain gages generate a resistance change in the measuring bridge and an output signal proportional to the load. For the best possible measurement results, the force should be applied axially and centrically to the load button. The mounting surface should ideally be hardened (60 HRC) and should not bend under the applied load. burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 1
Data Sheet Model 8527 - 2

Relative non-linearity* Characteristic curve deviation* Relative hysteresis Temperature effect on zero output Temperature effect on nominal sensitivity Electrical values Sensitivity nominal Measurement direction Standardization** Bridge resistance Excitation Insulation resistance Compression direction Environmental conditions Nominal temperature range Operating temperature range Mechanical values Deflection full scale Maximum operating force Overload burst Dynamic performance Protection class (EN 60529) recommended: 70 %; maximum: 100 % (of capacity) Intended mounting screws Tightening...

Open the catalog to page 2
Data Sheet Model 8527 - 3

Dimensional drawing 1 - Measuring ranges from 0 ... 0.5 kN up to 0 ... 20 kN | from 0 ... 112.4 lbs up to 0 ... 4.5 klbs Option Standardization, TEDS Cable extension burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 3
Data Sheet Model 8527 - 4

Dimensional drawing 1 - Measuring ranges from 0 ... 50 kN up to 0 ... 100 kN | from 0 ... 11.1 klbs up to 0 ... 22.4 klbs Option Standardization, TEDS Cable extension burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 4
Data Sheet Model 8527 - 5

Electrical termination Output signal burster load cells are based on a strain-gage Wheatstone bridge. This measurement principle means that the output voltage mV/V is highly dependent on the sensor supply voltage. Our website contains details of suitable instrumentation amplifiers, indicator and display devices and process instruments. Output signal - (green) TEDS ^ Excitation - (brown) Output signal + (yellow) Sensor - (grey) TEDS I/O (red)** TEDS GND (blue)** burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 5
Data Sheet Model 8527 - 6

burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 6
Data Sheet Model 8527 - 7

Order Code Measuring range Delivery ex stock at short notice ‘ shortened delivery time compared with cable length 3 m and 5 m in one piecek ■ Open cable ends + 6 cm single wires ‘ The data in the area 20 % - 100 % of rated load F Note Brochure Our brochure „Load cells for production, automation, R&D and quality assurance" is available for download on our website. It conatains numerous applications, detailed product specifications and overviews. Product videos Watch our How-to-do video at: www.youtube.com/bursterVideo Youl Tube ■ CAD data Download via www.burster.com or directly at...

Open the catalog to page 7

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

  1. Load cells

    25 Pages

  2. Load cells

    25 Pages

  3. Torque Sensors

    16 Pages

  4. Load-cell

    25 Pages

  5. Load-cell

    25 Pages