Data Sheet Model 8526
9Pages

{{requestButtons}}

Catalog excerpts

Data Sheet Model 8526 - 1

Delivery: ex stock | Warranty: 24 months Compression Load Cell MODEL 8526 Highlights M easuring ranges from 0 ... 100 N to 0 ... 1 MN Extremely compact design F or static and dynamic measurements T hree threaded holes on bottom for easy mounting and cable suitable for drag chain application P rotection class IP64 Options Non-linearity 0.1% F.S. S tandardized output signal burster TEDS Applications A ll forms of test benches R eference sensor for comparative and for calibration jobs I n cramped assembly situations Product description Small measuring ranges Wide measuring range 500 kN Thanks to its compact shape and three fixing holes on its underside, the 8526 compression load cell can be used in a variety of applications. With its wide choice of measuring ranges from 0 ... 100 N up to 0 ... 1 MN, it really can cover a wealth of measurement tasks, from the laboratory to use in heavy industry. The integral load button provides an easy and reliable means of applying the force to be measured. Angle errors in the load application with a deviation from the measurement axis of up to 3° have only a minor influence on the measurement signal. For ideal measurement accuracy, the load cell should be mounted on a surface that has been ground and has a hardness of at least 60 HRC. Wide measuring range 1 MN The model 8526 load cell is designed with an internal elastic membrane, to which strain gages are attached. When a compressive load is applied to the load cell, the membrane is elastically deformed and transfers its tension to the strain gages. These in turn respond with a proportional change in their ohmic resistance, which can be evaluated using a suitable instrumentation amplifier or display device. burster Sensors and Process Instruments – Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 1
Data Sheet Model 8526 - 2

Sensitivity nominal 1.5 mV/V Compression direction option 1.0 mV/V (±0.25 %) Bridge resistance -30 °C ... +80 °C < 50-70 pm 150 % of capacity > 200 % of capacity recommended: 50 %; maximum: 70 % (of capacity) IP64 Tightening torque mounting screws Mounting screws Installation instructions The entire bearing area of the sensor must be mounted on a base which is hardened (60 HRC), flat, polished or better lapped Material Natural frequency Mass The data in the area 20 % - 100 % of rated load F ‘ Realized on board in connection cable, 1.7 m from sensor housing or 0.3 m from cable end burster...

Open the catalog to page 2
Data Sheet Model 8526 - 3

* The data in the area 20 % - 100 % of rated load F ** Realized on board in connection cable, 1.7 m from sensor housing or 0.3 m from cable end burster Sensors and Process instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 3
Data Sheet Model 8526 - 4

burster Sensors and Process instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 4
Data Sheet Model 8526 - 5

Dimensional drawing 2 – Measuring range from 500 kN | 112 klbs Measuring range from 0 ... General tolerance of dimension burster Sensors and Process Instruments – Technical changes reserved. All data sheets

Open the catalog to page 5
Data Sheet Model 8526 - 6

Dimensional drawing 3 - Measuring range from 1 MN | 225 klbs burster Sensors and Process instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 6
Data Sheet Model 8526 - 7

Electrical termination Output signal burster load cells are based on a strain-gage Wheatstone bridge. This measurement principle means that the output voltage mV/V is highly dependent on the sensor supply voltage. Our website contains details of suitable instrumentation amplifiers, indicator and display devices and process instruments. Electrical termination at measuring range Messbereich up to 0 ... 200 kN Sensor + (pink)* Excitation + (white) Output signal - (green) Excitation - (brown) Output signal + (yellow) Sensor - (grey)* TEDS I/O (red)** TEDS GND (blue)** Shield only for extended...

Open the catalog to page 7
Data Sheet Model 8526 - 8

AccessoriesConnectors and units Order Code Calibration Test and calibration certificate Note Brochure Our brochure „Load cells for production, automation, R&D and quality assurance" is available for download on our website. It conatains numerous applications, detailed product specifications and overviews. Product videos Watch our How-to-do video at: www.youtube.com/bursterVideo Youl Tube ■ CAD data Download via www.burster.com or directly at www.traceparts.com burster Sensors and Process instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 8
Data Sheet Model 8526 - 9

* The data in the area 20 % - 100 % of rated load F burster Sensors and Process instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 9

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

  1. Load cells

    25 Pages

  2. Load cells

    25 Pages

  3. Torque Sensors

    16 Pages

  4. Load-cell

    25 Pages

  5. Load-cell

    25 Pages