Delivery: ex stock | Warranty: 24 months Miniature Load Cell MODEL 8415 Highlights easuring ranges from 0 ... 200 N up to 0 ... 5000 N, M 0 ... 45.0 lbs up to 0 ... 1124.0 lbs Smallest dimensions Inexpensive Made of stainless steel Options burster TEDS Vented version for vacuum Standardized output signal 1.0 mV/V Various cable lengts available Applications Fully automated production centers Measuring and controlling equipment Precision mechanics Tool manufacturing Equipment construction Product description Model 8415 original size Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces. The sensor has to be mounted on a smooth and even surface. burster Sensors and Process Instruments – Technical changes reserved. All data sheets at www.burster.com

Measuring range calibrated in N and kN from 0 ... Accuracy Relative non-linearity* Characteristic curve deviation* Relative hysteresis Temperature effect on zero output Temperature effect on nominal sensitivity Electrical value Sensitivity nominal Measurement direction compression direction option 0.8 mV/V (± 0.5 %) realized on board in connection cable, 1.7 m from sensor housing or 0.3 m from cable end Bridge resistance 350 Ω nominal (deviations are possible) Insulation resistance Environmental conditions Nominal temperature range Operating temperature range Mechanical values Deflection full...

Dimensional drawing Model 8415 Measuring range from 0 ... General tolerance of dimension Mounting The measurement force must be introduced centrically and without any lateral forces. To prevent contact at just a few points, ensure that the sensor is installed on a flat surface. Mounting instructions The sensor can be secured, for example, with silicon, wax or adhesive cement. Do not subject the sensor to lateral clamping forces as these would lead to measurement errors. When handling and installing the sensor, ensure that the cable outlet and sensor cable are not subject to excessively high tensile...

Electrical termination Output signal burster load cells are based on a strain-gage Wheatstone bridge. This measurement principle means that the output voltage mV/V is highly dependent on the sensor supply voltage. Our website contains details of suitable instrumentation amplifiers, indicator and display devices and process instruments. Excitation + (white) Output signal - (green) Excitation - (brown) Output signal + (yellow) Sensor - (grey)* TEDS I/O (red)** TEDS GND (blue)** Shield * only for extended cables of length 5 m or more ** option 8415 Measuring range from 0 ... Electrical termination...

Calibration Test and calibration certificate Included in scope of delivery of sensor Amongst other data, includes figures for zero point, full-scale output and calibration offset Standard factory calibration certificate for load cells or measurement chains (WKS) Optionally available Our standard factory calibration certificate includes 11 measurement points, starting at zero, spread evenly in 20% steps over the full measuring range, for increasing and decreasing load under the same installation conditions. Special factory calibration certificate for load cells or measurement chains (WKS) On request...

Order Code Measuring range Measuring range Delivery ex stock at short notice N 8 Nominal sensitivity/not standardized Connection cable 1.7 m (with standardization in the cable 2 m) Connection cable 3 m, extended by a circuit board at 1,7 m * Connection cable 5 m extended * * shortened delivery time compared with cable length 3 m and 5 m in one piece Open cable ends + 6 cm single strands 9 pins Sub-D connector model 9900-V209 9 pins Sub-D connector model 9900-V209 for 9163-V3xxxx 12 pins round connector model 9941 for burster desktop devices 9 pins Sub-D connector with burster TEDS model 9900-V229...