Catalogs >
burster präzisionsmesstechnik gmbh & co kg >
Data Sheet Model 2511

Data Sheet Model 2511
6Pages

Catalog excerpts

Battery Measuring Module AC/DC-IR measurement for 100% checking of battery cells in automation systems NEW Highlights Internal resistance ranges: 10 … 300 mΩ Frequency ranges: 1kHz, 100 Hz, 10 Hz, 1 Hz ingle to multi-channel applications, temperature measurement S via PT100 Accuracy: from ±0.25 % F.S. Measuring and evaluation results in a few milliseconds Compact design, Protection class IP54 Voltage measurement: 0 ... ±5 VDC Flexible fieldbus integration with EtherCAT or PROFINET Options Desktop device with display Wall mounting Top hat rail mounting Areas of application Quality assurance of battery cells Sorting processes oL, MoL assembly processes for battery modules, packs or B cell-to-pack Product description Display device Multi-channel system with top-hat rail Internal resistance measurement The 2511 battery measuring module is particularly suitable for fast, multi-channel measurement of battery cells in automation systems. The device operates in accordance with the well-tried four-conductor measuring method, and combines the functionality of a battery tester and a battery analyzer, making it possible to carry out rapid testing of batteries irrespective of the technology. Fast measurement and evaluation of important parameters takes place in just a few milliseconds. The testing can be carried out with individually adjustable parameters. Effect on electrolytes detectable The device corresponds with the latest CE directives, and is designed for laboratory operation and also for deployment under harsh industrial conditions in automation systems. Internal resistance measurement The variable fieldbus interfaces enable flexible process integration. Fully automatic testing can be carried out in this way. Effect on electrode detectable Open circuit voltage measurement Temperature measurement burster – Technical changes reserved. All data sheet at www.burst

Open the catalog to page 1

Technical data Operating modes and measuring times Operating mode * Parameters Measuring time 1 channel/ms Measuring time 5 channel/ms Measuring principle Number of measuring channels Internal resistance (ohmic component), discharging, polarity-independent Up to 5 individual cells / Cascading of additional devices via PROFINET, EtherCAT possible Internal resistance Measuring range from 0 ... Measuring frequencies Resolution Measuring current Measuring error (at 50 Hz mains frequency), (Data refer to a cell voltage of 3.6 VDC) ±0.25 % F.S. ±0.4 % of reading (23 °C ±5 °C, Operating mode...

Open the catalog to page 2

Principle of operation Battery measuring module model 2511 is optimized for rapid testing of cells. It operates in accordance with the well-tried four-conductor method (Kelvin connection) and has 4 connections for impedance measurement: 2 cables for supplying the test current and 2 cables for the voltage measurement. The battery tester works as a current sink. It draws a relatively small DC current IDC from the test object (battery cell) in relation to the load current, converts this into an AC current IAC, applies this to the test object (battery cell) and measures the resulting voltage...

Open the catalog to page 3

Applications 16-channel high-speed application – 100 % monitoring in vehicle battery module received goods checking Many battery cells are required to manufacture and install high-performance battery modules for electric vehicles. In the received goods checking area, important battery parameters of each individual cell must be reliably measured and evaluated within very short cycle times. After contacting the prismatic cells, the internal resistance with 1 kHz and the cell voltage of all 16 cells are measured and evaluated within approx. 0.5 s with the cascadable battery measuring module...

Open the catalog to page 4

DigiControl PC software The innovative, intuitively operated PC software for battery measuring module 2511 is used wherever diagnoses, battery condition determination or target/actual comparisons are to be carried out on battery cells. Convenient device configuration via USB interface Management/configuration of different operating modes Backup of settings Measurement data logging Entry of test object designations for measurement data logging Exporting the measurement data in an Excel file or as plain text Evaluation of the measuring results Accessories Order code 9900-K251 Supply cable 2 m...

Open the catalog to page 5

Generate order code Standard 2 2 Housing Panel-mount unit without display 24 V/DC Fieldbuses EtherCAT Housing Desktop device with display 24 V/DC Fieldbuses EtherCAT burster – Technical changes reserved. All data sheet at www.burster.

Open the catalog to page 6

Data Sheet Model 2511 6Pages

Catalog excerpts

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

Data Sheet Model 2511
6Pages