OPERATION MANUALBattery Cell Simulator Model 2500-Z100 Manufacturer: burster burster prazisionsmesstechnik gmbh & co prazisionsmesstechnik gmbh & co kg kg All rights reserved Talstr. 1 - 5 Postfach 1432 Germany Germany Valid from: Fax.: (+49) 07224-645-88 E-Mail: [email protected] www.burster.de

Warranty disclaimer All information in the present documentation was prepared and compiled with great care and reproduced in accordance with effective control measures. No warranty is provided for freedom from errors. We reserve the right to make technical changes. The present information as well as the corresponding technical data can change without notice. Reproduction of any part of this documentation or its processing or revision using electronic systems is prohibited without the manufacturer’s prior written approval. Components, devices and measurement sensors made by burster präzisionsmesstechnik...

Declaration of Conformity THE MEASUREMENT SOLUTION. EU-Konformitatserklarung (nach en iso/iec 17050-1 2010) EU-Declaration of conformity (in accordance with EN ISO/IEC 17050-1:2010) Name des Ausstellers: Issuer's name: Issuer's address: burster prazisionsmesstechnik gmbh & co kg Talstr. 1-5 Battery Cell Simulator fur Batterie-Messmodul Typ 25xx Battery Cell Simulator for battery measurement module type 25xx Modellnummer(n) (Typ): Model number / type: Diese Erklarung beinhaltet obengenannte Produkte mit alien Optionen This declaration covers all options of the above product(s) Das oben beschriebene...

BATTERY CELL SIMULATOR 2500-Z001

BATTERY CELL SIMULATOR 2500-Z001 The following symbols on the model 2500-Z100 battery cell simulator and in this operation manual are warning signs of hazards. 1.1 Symbols used in the operation manual The following signal words are used in the operation manual according to the specified hazard classification. The signal words introduce warnings that must be followed and acted upon with care to prevent accidents, injuries and damage to property. DANGER High degree of risk: indicates a hazardous situation which, if not avoided, will result in death or serious injury. Moderate degree of risk: indicates...

1.2 Symbols on the device Symbol

Read the operation manual carefully before using the equipment, and keep it for future reference. The operating manuakl must be read carefully before putting the device into service or carring out maintenance or other work on the model 2500-Z100 battery cell simulator. All safety instructions and safety regulations relating to accessory equipment / attachments must be complied to ensure safe and proper handling of the device. Only qualified personnel may perform maintenance work on electrical components (see section 2.5 Personnel). These safety instructions must be included (Download on product...

BATTERY CELL SIMULATOR 2511-Z100 The following requirements must be met when storing the model 2500-Z100 battery cell simulator: • Store at temperatures between -10 °C and +70 °C • The model 2500-Z100 battery cell simulator must be packed in clean packaging The following requirements must be met when operating the model 2500-Z100 battery cell simulator: • Indoor operation only • Operate at temperatures between 0 °C ... +50 °C • Humidity: 70% up to +31 °C, decreasing linearly above that temperature to 50% at Tmax, non-condensing • Transient overvoltage category: CAT II The model 2500-Z100 battery...

BATTERY CELL SIMULATOR 2500-Z001 2.5 Personnel Qualified personnel are persons who, due to their training, experience, instruction and knowledge of the relevant standards, regulations, accident prevention rules and working conditions have been authorized by the person responsible for the safety of the machine/product to carry out the relevant activities and are therefore able to recognize and avoid potentially dangerous situations (for the definition of Fachkrafte (competent persons) see VDE 0 105 or IEC 364, which also specify that unqualified persons must not be employed). Knowledge of first...

burster präzisionsmesstechnik gmbh & co kg provides a manufacturer’s warranty for a period of 24 months after delivery. Any repairs required during this time will be made without charge. This does not include damage arising from improper use. Please note the following when sending the model 2500-Z100 battery cell simulator in for a repair: • If there is a problem with the device, please attach a note to the body of the device summarizing the fault. • Technical specifications subject to change at any time without notice. We also state explicitly that we do not accept liability for consequential...

Power supply Please refer to the data sheet for details on the versions of this product. The current datasheet and further related information about the model 2500-Z100 battery cell simulator can be obtained here https://www.burster.de/fileadmin/user_upload/redaktion/Documents/Products/DataSheets/Section_2/2500_EN.pdf or via the QR-code below: The model 2500-Z100 battery cell simulator can be operated with a voltage of 18 … 30 VDC, nominal 24V. The maximum power consumption of the model 2500-Z100 battery cell simulator is 5 W.

BATTERY CELL SIMULATOR 2511-Z1004 Controls and connections 4.1 Front view Figure 1 Front face of the model 2500-Z100 battery measuring module

BATTERY CELL SIMULATOR 2500-Z001 4.2.2 Connection: Out R/U Figure 3 Connector for output signal R/U 4.3.1 Connecting the power supply The model 2500-Z100 battery cell simulator must be connected disconnectable to the power supply. Therefore, a switch or a relay must be integrated into the power supply cable. 4.3.2 Connecting a model 2511 battery measuring module The schematic drawing below shows the basic connection logic.

Connecting the battery cell simulator must be done in a 4-wire configuration. There are two contacting possibilities: • The model 2500-Z100 battery cell simulator can be connected directly to a model 2511 battery measuring module (shown in figure 5). • The model 2500-Z100 battery cell simulator can be connected via a contacting adapter that represents a battery cell to a model 2511 battery (shown in figure 6). Direct connection of a model 2500-Z100 battery cell simulator to a model 2511 battery measuring module Connection of a model 2500-Z100 battery cell simulator to a contacting adapter To...