Delivery: ex stock | Warranty: 24 months High-Precision Torque Sensor for non-rotating applications MODEL 8625 Highlights Measurement ranges of 0 ... 0.01 N·m to 0 ... 200 N·m Linearity error as low as from ≤ 0.05 % F.S. Standardized output signal Tare function, filter and average values configurable Options Output signal ±10 V / USB burster TEDS Bracket or flange adapter offers choice of mounting options Immune to side loads thanks to built-in support bearings Dual-range model Applications immune to side loads thanks to support bearings Test setups for precision mechanics Measuring the frictional torque ob bearings Measuring the torques applied to vehicle control elements and knobs Reference sensor in calibration systems Product description This high precision torque sensor is designed for both static and dynamic measurements on non-rotating applications. It is particularly suitable for torque measurements on, for instance, extremely small electrical actuating drives and micro-mechanical actuator elements, or for measuring reaction torques e.g. on micro-motors. The high accuracy of measurement also makes this sensor ideal for use as a reference in many fields of industrial manufacture as well as laboratory research and development projects. Not containing any rotating parts, it requires no maintenance if properly used. The strain-gage based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ±10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function. Measurements via USB in addition to the voltage output are available with the USB measurement option. The sensor comes with the DigiVision software for performing measurements and data archiving, with drivers additionally available e.g. for LabVIEW. Integration into custom software is possible via DLL The burster TEDS option (electronic data sheet, memory chip with sensor-specific data) allows rapid configuration of compatible evaluation units (instrumentation amplifier, indicator, ...). burster Sensors and Process Instruments – Technical changes reserved. All data sheets at www.burs

Measuring range calibrated in N.m from 0 ... Accuracy Relative non-linearity Relative hysteresis Maximum limit axial load Maximum limit radial load Spring constant Mass moment of inertia [10-6 kg*m2] measuring side Electrical values without amplifier Sensitivity Bridge resistance (full bridge) Excitation voltage Environmental conditions without amplifier Range of operating and nominal temperature Sensitivity of temperature effects on the zero point 0.020 % F.S./K on the sensitivity 0.015 % F.S./K Electrical values with amplifier/USB 5 ... 30 V DC (or 5 V via USB) Rated supply voltage range Output...

Measuring range calibrated in N.m from 0 ... Accuracy Relative non-linearity Relative hysteresis Maximum limit axial load Maximum limit radial load Spring constant Mass moment of inertia [10-6 kg*m2] measuring side Electrical values without amplifier Sensitivity Bridge resistance (full bridge) Excitation voltage Environmental conditions without amplifier Range of operating and nominal temperature Sensitivity of temperature effects on the zero point 0.015 % F.S./K on the sensitivity 0.01 % F.S./K Electrical values with amplifier/USB Rated supply voltage range Output voltage at ± rated torque Output...

Dimensional drawing - measuring ranges 0.01 Nm ... 10 Nm Measuring side Holes on the sensor underside only up to 10 N.m. For detailed dimensions, including with fitted flange or bracket, you can find sensor CAD data on our website www.burster.com. Dimensional drawing - measuring ranges 20 Nm ... 200 Nm Electrical values 7-pin miniature connector, additionally micro-USB interface for configuration/measurement (Option, USB connection cable included) Pin Assignment without electronic Assignment with electronic Bridge supply - Control signal Switching between ranges (option) burster Sensors and Process...

Accessories Flange-mounted model Bracket-mounted model The flange adapter allows easy integration of the sensor in existing equipment with a flange connection. When ordered with the sensor, the flange adapter comes prefitted; please refer to order code. The bracket provides a quick-to-fit and stable fixture for the sensor. When ordered with the sensor, the bracket comes pre-fitted; please refer to order code Alternatively it can be ordered separately as an accessory. Alternatively it can be ordered separately as an accessory. Please refer to the accessories data sheet 8600-Z00X Please refer to...

DigiVision configuration and analysis software Features Can be used to actuate tare function, with value stored in sensor onfiguration options for averaging and filters; C value stored in sensor Intuitive user interface Automatic sensor identification Sensor calibration data readout DigiVision Light PC software freely available on our website DigiVision configuration and analysis software max. 200 measured value/s for one sensor DigiVision Standard PC software Model 8625-P100 DigiVison configuration and analysis software up to 16 channels PC-Software DigiVision Professional Model 8625-P200 DigiVision...

Order Code Measuring Range 0 ... Standard sensor Standard sensor, one measuring range Dual-range version, graduation 1:5 from measuring range 5 N.m Dual-range version, graduation 1:4 from measuring range 2 N.m Dual-range version, graduation 1:2 from measuring range 2 N.m Without additional support bearings on the measuring side With additional support bearings on the measuring side Output signals Output voltage 10 V incl. configuration USB Output voltage 10 V incl. USB configuring and measuring USB Output signal standardized, mV/V Output signal, mV/V with TEDS Versions Both round shaft ends Incl....