■ Measuring ranges from 40 mQ to 4 kQ ■ Input voltage protection up to 415 Vrms 2320 EN Application The RESISTOMAT® model 2320 is a universally applicable and easy to operate measurement device for low-ohmic resistances. The light and handy device in a stable IP54 plastic housing with membrane keypad is likewise suitable for use in service, laboratory or on the production floor. The power supply is done via built-in rechargeable battery packs or by standard batteries. If need be, the temperature of samples can be measured and the sample resistance is subsequently compensated to fit the value at 20°C. This applies for samples with resistances depending on the sample’s temperature. The temperature coefficients for copper and aluminium are included as standard.A third and fourth coefficient may be set individually for any given material to be measured. The application range is manifold, such as measurement of: ► Cable and wire, and many more Description The 4-wire measurement configuration eliminates possible errors caused by test lead and contact resistance. This is the basis for resistance measurements in the mQ range. The resistance value calculated in the current voltage method is then indicated on the large LCD display in mQ, Q or kQ. Single as well as permanent measurements are possible whereby the 6 measurement ranges can be selected in manual or automatic mode. The standard resistance value at 20 °C is calculated and displayed if the temperature compensation is active. The measured temperature may also be displayed directly. Thermo voltages are eliminated by the bipolar current source and the calculation of the mean value (key AVE). Low battery charge is informed through the LED "LOBAT". The battery pack can be replaced in a very simple manner. Recharging is done in an external station. Technical changes reserved - Latest updates of data sheet always under www.burster.com burster praezisionsmesstechnik gmbh & co kg ■ Tel. +49-7224-6450 ■ Fax 64588 Talstr. 1-5 ■ DE 76593 Gernsbach ■ www.burster.com ■ i

Range selection: Model 2320-Z002 Model 2320-Z003 Model 2320-Z004 Model 2320-Z005 Model 2320-Z006 Model 2320-Z007 Model 2320-Z008 Model 23DKD-2320-V001 Model 23WKS-2320-V001 Technical Data Construction The device has a portable, sturdy plastic IP54 housing. The operation is done via the membrane keypad. The connections for the sample and the Pt100 sensor are located at the backside of the device. The rechargeable battery pack is easily and quickly changeable without opening of the device. Accuracy (with temp. comp. off): Range 4 Q to 4 kQ Range 400 mQ Range 40 mQ Load voltage: Measuring time (for...