High-Precision Resistance Decade Model 1406 Model 1407 ■ Resistance material MANGANIN® TC < 20 ppm/K The range of application for the high-precision resistance decades models 1406 and 1407 stretches from reference standard for precision measurements up to simulation ot a host of measuring transducers. They can be used for control in complicated equipments and systems, such as equivalent circuit in resistor networks. Another application is the use in switching circuits, as reproducible variable in laboratory and test assemblies. The decade resistors meet all the requirements of these differing functions as well as the resulting demands. Technical changes reserved - Latest updates of data sheet always under www.burster.com Description The high-precision resistance decades models 1406 and 1407 are designed to meet the highest demands with regard to precision, temperature and long-term consistency. Many years at experience, tried-and-tested technology and the use of field proven materials guarantee the high level of precision. The decade resistors consist of low-capacity and low inductance wire windings of MANGANIN®. The low temperature coefficient of this material, the low error tolerance of the resistors and the long-term stability achieved through careful artificial ageing are the guarantee for reliable conformity with the technical specifications for these decade resistors. A specially developed precision stepping switch with high quality contact material and optimal brush construction guarantee very good reproducibility. The contacts are self-cleaning and virtually free of thermoelectric power. All 7 decade resistor stages are contained in an attractive sheet steel casing. The casing acts as screen against electromagnetic and electrostatic interference. lt is conductively connected to the earth socket on the front panel. The decade resistor, designed for use on the work or laboratory bench, can also be installed in a 19"-rack using two angle brackets. burster praezisionsmesstechnik gmbh & co kg ■ Tel. +49-7224-6450 ■ Fax 64588 Talstr. 1-5 ■ DE-76593 Gernsbach ■ www.burster.com ■ [email protected]

in Ohm absolute at 23 °C MANGANIN® < 20 ppm/K 0.4 W per step = 4 W/decade 500 V max. 2800 VDC according to DIN EN 60477 Technical Data Resistance ranges: model 1406 Zero resistance of the complete resistance box: Resistance tolerance: Resistance material: Temperature coefficient: Long-term stability: Power dissipation: Operating voltage: Test voltage: Switching arrangement: short-circuiting between two neighbouring Switch positions: 12, limited to 11 steps Contact material: Ag plated on E-Cu, slider pack, solid silver Operating moment: approx. 0.1 Nm Dimensions (length by height by depth): 433...