Magslide Beltless Conveyors - Heavy Duty Standard 60˚ MagSlide Heavy-Duty Model Designation SPECIFICATIONS FRAME WIDTHS: 12”, 15”, 18”, 24”, 30”. GUIDEWORK: Oil-filled UHMW chain guide provides continuous lubrication; supplemental oil fittings are provided to further extend chain life. MAGNETS: Std ceramic on 12: c/c; Rare Earth magnets and custom centers for special applications. SLIDERBED: 10 ga. 304SS on 12” & 15” widths; 3/16” 304SS on 18”-30” widths. SIDEGUARDS: Std 1” high sideguards; additional chutes, guides, hoppers, tanks, and impact plates available upon request. DRIVE: Direct-Drive with worm gear reducer minimizes space and eliminates bulky sprockets and chainguards, std 230/460V, 3ph motor at 50 fpm, 1 to 5 hp; drive can be rotated in 45 degree increments and mounted left or right to avoid nearby obstructions. Optional Top Mount with Parallel Shaft reducer. SUPPORTS: Std welded floor supports on Type “B”, “C”, & “D” models. Optional castors, floor supports, skid plates, or mobile bases available on all models. CONSTRUCTION: 10 ga. mild steel frame with machinery enamel paint. Optional epoxy paint and sealed lower frame for submersible applications. CONTROLS: Optional toggle switch for 1ph drives or starter with pushbuttons for 3ph drives. Controls supplied either mounted and wired or shipped loose. CHAIN: RC2060 Double Pitch chain. TAKE-UP: Automatic spring-loaded chain tensioning. CONFIGURATIONS: Available in straight, angled-incline, long radius, & z-shape configurations. OTHER SPECIFICATIONS AND OPTIONS: See Model Designation chart. Drives can be mounted left or right and rotated in 45-degree increments to avoid obstructions. Direct Mount Drive Use this chart to describe the conveyor you need when discussing or selecting options, ordering, or requesting quotes. MSH Angle (α) 0 - 0˚ 1 - 15˚ 3 - 30˚ 4 - 45˚ 6 - 60˚ 7 - 75˚ 1 2 - X1-Y1Width (in) Type Drive Type 12” A - straight A - Std 230/460V, 3 ph 15” B - incline B - Opt 115/230V, 1 ph 18” C - Z-Shape 24” D - Noseover 30” Drive Side R - Right (std) L - Left (opt) T - Top For X and Y dimensions, see drawings below, round up to nearest foot in model number and specify exact length in inches. For type “A” conveyors, omit Y dimension. Drive speeds are available from 10 fpm or less to the top-r

Magslide Beltless Conveyors - Medium Duty MagSlide Medium-Duty Model Designation Use this chart to describe the conveyor you need when discussing or selecting options, ordering, or requesting quotes. MSM FRAME WIDTHS: 10”, 12”, 15”, 18”. GUIDEWORK: Oil-filled UHMW chain guide provides continuous lubrication; supplemental oil fittings are provided to further extend chain life. MAGNETS: Std Ceramic on 12” c/c; Rare Earth magnets and custom centers for special applications. SLIDERBED: 13ga 304SS; optional rigidized (textured) stainless steel available for transfer of oily slugs and scrap. SIDE GUARDS:...

Magslide Beltless Conveyors - Low Profile Use this chart to describe the conveyor you need when discussing or selecting options, ordering, or requesting quotes. Length (ft) Drive Type Drive Side Drive Speed 1 Options* 2’, 3’, 4’ A - Std 1/4hp, 115v, 1 ph R - Std right 3 - Opt 33 fpm See option 5’, 6’, 7’ B - Opt 1/4hp, 230/460v, 3 ph L - Opt left 4 - Std 44 fpm list below 08” 8’, 9’, 10’ C - Opt air drive, 1/4hp @ 50 psi 10” D - Opt 1/4hp, 90vdc variable 12” speed with 115v, 1 ph control SPECIFICATIONS AND OPTIONS HEIGHT: Conveyor frames are 3 1/8” high; additional clearance needed for parts...