*mydirectindustry

S28 R

Product catalog summary

Overview: The SPRITZ 28 R BUNKER is a high-performance plastering machine designed for efficiency and versatility in construction projects. It is equipped with advanced features to meet the demands of professionals in the field.

Specifications:

Engine Options: Lombardini 9LD626/2 or Kubota D 1305, both offering around 29 horsepower at 3000 rpm, used at 2000 rpm.
Compressor: 400 l/min flow at 4 bar pressure.
Screw Pump: Theoretic flow of 0-60 l/min, max granulometry of 6 mm, and max theoretic pressure of 30 bar.
Transport Distance: Horizontal up to 100 m, Vertical up to 40 m.
Dimensions: 3.40m x 1.65m x 1.40m, Weight: <750 Kg.

Key Features:

New ALKO axle for stability and safe towing up to 130 Km/h.
Hydraulic stand legs and retractable grab bars for easy positioning.
Automatic decompression pipes and belt tensioner for enhanced durability.
Optional DAT system for automatic hose decompression.
Soundproofed hood with large opening for noise reduction.

Applications: The S28 R is suitable for pumping, spraying, or injecting various materials including traditional and pre-mixed plasters, fiber-reinforced mortar, refractory mortar, self-leveling floor screeds, and special products for concrete and brickwork recovery.

Additional Options:

Dust attenuation device to reduce dust during material mixing.
HP cleaner for independent high-speed washing.
Water meter integrated in the control panel for precise water dosage.

Conclusion: The SPRITZ 28 R BUNKER combines modern design, advanced technology, and high productivity at low costs, making it a leading choice for construction professionals seeking reliability and efficiency.

Catalog excerpts

New engines, the choice is yours ... Lombardini The most powerful of the category Reliable and quiet 3 cylinders 1305 cm3 29.5 horsepower at 3000 rpm used at 2000 rpm Cooling: By water Engine auto idle 2 cylinder 1248 cm3 29 horsepower at 3000 rpm used at 2000 rpm Cooling: By air Engine auto idle SPRITZ 28 R The plastering machine you've been waiting Rubber nozzles for plaster Motor Type Power 2000 rpm Spray gun for finishing plaster Spray gun for joint filling Nozzles for filling joints Spray gun for viscous material Compressor Flow Pressure Screw pump* Theoretic flow Max granulometry Max theoretic pressure Transport distance Horizontal** Vertical** Load height Mixer capacity Hopper capacity Dimension Lxlxh 80025 Casandrino - NA - Italy Via G. Falcone, 91 TEL.+39 081-505.36.21 FAX +39 081-833.29.73 [email protected] www.bunker-teksped.com * Pump type on request: 1L6 – 2L7 – 2L74 The new ALKO axle of 1000 kg with tires 165 guarantees an exceptional stability for safe towing even with normal motor vehicles. (Max 130 Km/h) ** Depending on the material, consistency and diameter of the hoses The information in this catalogue is approximate, not binding and may be changed without notice Pumping technologies Bunker retains the right to modify the data at anytime - © 2015 by TEK.SP.ED. - all rights reserved - printed in Italy - 200607-0815-GB Technical features Standard spray gun for plast

Open the catalog to page 1

The control panel allows control of all functions by showing the state of operation. The control box is protected by a high resistance plexiglass door. The hood is completely soundproofed. In addition, it is characterized by a very large opening. The water dosage is ensured by a water meter integrated in the control panel. (optional) The fuel tank with the prefilter and the bumper bar has a capacity of 25 liters. Winning elements Operating economy, modern design, avant-garde technology, are the strong points of this extraordinary plastering machine. Hundreds of machines sold all over the world...

Open the catalog to page 2

S28 R

S28 R

Catalog excerpts

All Bunker Teksped catalogs and technical brochures