UNWINDING SYSTEMS Innovation

Whether it is clothing, shoes, car seats, sofas, banners and much more – the Mehrstetten based market leader bullmer GmbH ensures the right design. The company based in Mehrstetten in South Germany develops and produces automated CNC Cutter machines for material handling, material flow up to automatic cutting. Universally acclaimed high-quality, precision cutting systems with sorting and distribution technology for various widths and all desired lengths with the quality mark known all over the world as “Made in Germany.” The widest range of materials including fabrics, leather,carbon- and glasfibres,...

UNWINDING SYSTEMS AWV 1 Materials: non-elastic materials, that can be deducted from the bar. Sectors: Base: ■ dereeler with non-driven unrolling bar working width Options: ■ combined with pressure roller AWV 1S 3 / S 6 Materials: strong, non-elastic materials, which can be pulled of from the bottom. Sectors: Basis: ■ unwinder with non-driven unrolling bar working width AWV 20 Materials: materials, that don`t tend to full. Sectors: Base: ■ unwinder without unrolling bar ■ cradle technique ■ edge control ■ roll is driven by plastic modular belts working width Options: ■ lift table to load the AWV...

UNWINDING SYSTEMS AWV - A Materials: extremely versatile Sectors: Base: ■ unwinder driven by unrolling bar ■ edge control ■ roll is driven by center drive working width Options: ■ Loading-system AL-T 75A or AL-T 120A ■ protection level IP60 orientated by DIN EN 60529 MAV 5 ST Materials: non-warp-sensitive materials. Sectors: Base: ■ rollbar with one pair of cones and handwheel ■ secound position for rolls on the right hand side ■ edge control ■ mechanical brake to mind an after-run of the roll working width Options: ■ Movable or stationary version (only in connection with pressure ■ rollers)...

UNWINDING SYSTEMS SAV 300/600 D Materials: textiles, PVC, mesh etc. Sectors: Base: ■ unwinder without unrolling bar ■ edge control (can be switched off) ■ light beam safety device in unwindig area ■ unwinder with driven double roller working width Options: ■ ionisation device SAV 1000 Materials: strong, non-elastic materials. Sectors: Base: ■ unwinder within calendarrolls deduction and non driven unrolling ■ bar with pneumatic brake ■ edge control, sensor controlled material independent threading. ■ Manual threading and unthreading ■ stationary version ■ Line laser for aligning materials working...

UNWINDING SYSTEMS SAV 1500 Z Materials: for processing heavy material rolls Sectors: Base: ■ stationary version ■ unwinder with center drive (without unrolling bar) ■ edge control, keyboard controlled material independent threading ■ Manual threading and unthreading ■ continuously adjustable unwinding speed of the material roll working width protection level IP60 orientated by DIN

LOADING SYSTEMS AL - T 75 Materials: extremely versatile Sectors: Base: ■ Hooks / pendulum suspension working width Options: ■ frequency control for Loadingsystems AL ■ protection level IP60 orientated by DIN EN60529 AL - ST 120 Materials: extremely versatile Sectors: Base: ■ Hooks / pendulum suspension working width Options: ■ frequency control for Loadingsystems AL ■ protection level IP60 orientated by DIN EN60529 EHV extremely versatile Sectors: Base: ■ Movable or stationary version working width Options: ■ protection level IP60 orientated b

LOADING SYSTEMS MULDENLADER Materials: coated materials, coated lether Sectors: Base: ■ Movable or stationary version working width Options: ■ protection level IP60 orientated by DIN EN60529 WINDING SYSTEM WINDING SYSTEM Materials: universell Sectors: Base: ■ Movable or stationary version working width Options: ■ frequency control ■ protection level IP60 orientated by DIN

UNWINDING SYSTEMS aéroport Stuttgart Metzingen gare centrale Merklingen bullmer GmbH Heutal 7 | Industriegebiet D-72537 Mehrstetten | Germany Phone +49 7381 183-0 Fax +49 7381 723 Mail [email protected] www.bullmer.de Owing the dynamic nature and software development technical specifi cations are nonbinding. They are subject to changes for the sake of technical progress. Performance data depend on the materials that are processed and apply on the condition that they are operated as specifi ed and that the prescribed consumables, wear parts and original spare parts are used.