40’ SPEC. BULLBOX
6Pages

STEEL DRY CARGO CONTAINER BULLBOX 40’ - 40’ × 8’ × 8’6” MODEL NO: BULLBOX 40’ ISO STANDARD DATE OF ISSUE: May 2021 Contenedores y Embalajes Normalizados S.A. P.I. Silvota, Peñasanta 12, Llanera. 33192, Asturias- Spain

This specification will cover the design, construction, materials, testing and inspection performances of 40'x8'x9'6" ISO. 1CC type steel dry cargo containers. These containers specified herein will be manufactured by Contenedores y Embalajes Normalizados, S.A (hereinafter referred to BULLBOX) under strict quality control by BULLBOX and be approved by the classification society (Bureau Veritas, China Classification Society, Lloyd’s Register of Shipping, American Bureau of Shipping...) The container will be designed and constructed for carriage of general cargo by marine (on or below deck),...

External Length Internal Length Door opening dimensions Width Internal cubic capacity (nominal) 67.7 cu.m Gooseneck tunnel Length Ratings Max. Gross Weight (R) Tare Weight (design) (T) Max. Payload (P) Dimensions and ratings are subject to small variations depending on the batch. STEEL DRY CARGO CONTAINER BULLBOX 40’ - 40’ × 8’ × 8’6”

3. Construction The container is constructed with Anti-corrosive steel: CORTEN A, SPA-H or equivalent. The container will be constructed with steel frames, fully vertical-corrugated steel sides and front wall, horizontal-corrugated steel double doors at rear end, die- stamped steel roof and corner fittings. All welds of exterior including the base frames will be continuous welding using CO2 gas. The corner fittings will be designed in accordance with ISO 1161 and manufactured at the works approved by classification society. Gooseneck tunnel: The gooseneck tunnel consists of 4.0 mm thick one...

4. Marking The containers will be marked in accordance with ISO, TCT, UIC, CSC and TIR requirements, owner's marking specifications and other required regulations. Materials 1) Decal: - Self-adhesive, high tensile PVC film for seven (7) years guarantee without peeling off, tenting or color fading. 2) Certification plate: Stainless steel plates to be chemically etched by acid. Structure All the containers shall be guaranteed by manufacturer to be free from defects in materials, workmanship and structure for a period of one (1) year from the date of production certificate. Painting The paint...

Contenedores y Embalajes Normalizados S.A. P.I. Silvota, Peñasanta 12, Llanera. 33192, Asturias- Spain STEEL DRY CARGO CONTAINER BULLBOX 40’ - 40’ × 8’ × 8’6