40’ FLAT RACK
40’ FLAT RACK
This document outlines the specifications for the BULLBOX 40’ Flat Rack Collapsible Steel Dry Cargo Container. It is designed and constructed according to ISO standards and is suitable for sea, road, and rail transport. The container is manufactured under strict quality control and approved by various classification societies.
Handling and Transportation
The container can be handled without permanent deformation under specific conditions, including lifting at top or bottom corner fittings and using forklift pockets when empty.
Dimensions and Ratings
The flat rack has specific external and internal dimensions, with a maximum gross weight of 52,500 kg and a maximum payload of 47,400 kg. It can be stacked up to 8 high at 30,480 kg or 5 high at 52,500 kg gross.
Marking
Containers are marked according to ISO, TCT, UIC, CSC, and TIR requirements, using high tensile PVC decals and stainless steel certification plates.
Guarantee
The structure is guaranteed to be free from defects for one year, while the paint system is guaranteed against corrosion for three years. Decals are guaranteed for seven years without peeling or fading.
Catalog excerpts
40’ FLAT RACK SPEC. BULLBOX STEEL DRY CARGO CONTAINER BULLBOX 40’ - 40’ × 8’ × 8’6” MODELO NO: BULLBOX 40’ FLAT RACK COLLAPSIBLE ENDS DATE OF ISSUE: May 2021 Contenedores y Embalajes Normalizados S.A. P.I. Silvota, Peñasanta 12, Llanera. 33192, Asturias- Spain
Open the catalog to page 1
1.1 General This specification covers design, construction, materials, testing, inspection & prototype container. The flat rack is built in accordance with the requirements of I.S.O.1AA Type platform and platform-based containers by BULLBOX. These containers specified herein will be manufactured by Contenedores y Embalajes Normalizados, S.A (hereinafter referred to BULLBOX) under strict quality control by BULLBOX and be approved by the classification society (Bureau Veritas, China Classification Society, Lloyd’s Register of Shipping, American Bureau of Shipping...) The flat racks will be suitable...
Open the catalog to page 2
The flat racks are built to the following dimensions and tolerances, but the reads must refer to the drawings to determine the shape of the flat rack and its suitability for cargo: External Length: Length: Length: Width: Height: Height: Camber: Stack height: (Base, bottom castings) (Tare condition, top castings) (Loaded to R, top castings) (Base bottom castings) (End frame erected) (End frame folded) (after preloading) Internal Length (Between corner posts) (Over bottom side rail) (Over bottom side rail) Forklift Pockets Width Ratings Max. Gross Weight (R) Max. Payload (UDL) Concentrated Load...
Open the catalog to page 3
3. Marking The containers will be marked in accordance with ISO, TCT, UIC, CSC and TIR requirements, owner's marking specifications and other required regulations. Materials 1) Decal: - Self-adhesive, high tensile PVC film for seven (7) years guarantee without peeling off, tenting or color fading. 2) Certification plate: Stainless steel plates to be chemically etched by acid. Structure All the containers shall be guaranteed by manufacturer to be free from defects in materials, workmanship and structure for a period of one (1) year from the date of production certificate. Painting The paint system...
Open the catalog to page 4
Contenedores y Embalajes Normalizados S.A. P.I. Silvota, Peñasanta 12, Llanera. 33192, Asturias- Spain STEEL DRY CARGO CONTAINER BULLBOX 40’ FLAT RACK COLLAPSIBLE 40’ × 8’ × 8’6” B
Open the catalog to page 5All Bullbox catalogs and technical brochures
40’ HC SPEC. BULLBOX6 Pages
20’ HC DD SPEC. BULLBOX7 Pages
20 HC SPEC. BULLBOX6 Pages
40’ SPEC. BULLBOX6 Pages
Shipping containers2 Pages
