20 HC SPEC. BULLBOX

Product catalog summary

General Specifications
This document outlines the specifications for the BULLBOX 20’HC steel dry cargo container, designed for global transport by sea, road, and rail. It is manufactured by Contenedores y Embalajes Normalizados S.A. under strict quality control and complies with various international standards, including ISO, T.I.R., C.S.C., and T.C.T. certifications. The container is built to withstand temperatures from -40ºC to +70ºC without compromising structural integrity or watertightness.

Handling and Transportation
The container is designed for handling without permanent deformation under various lifting conditions, including top and bottom corner fittings and forklift pockets. It is suitable for marine transport (stacked up to seven high), road transport (secured on flatbed or skeletal chassis), and rail transport (secured on flat cars).

Dimensions and Ratings

External Dimensions: Length 6,058 mm, Width 2,438 mm, Height 2,896 mm
Internal Dimensions: Length 5,898 mm, Width 2,352 mm, Height 2,698 mm
Door Opening: Width 2,340 mm, Height 2,585 mm
Internal Cubic Capacity: 37.4 cu.m (1,322 cu.ft)
Max. Gross Weight: 30,480 kg (67,200 lb)
Tare Weight: 2,100-2,150 kg (4,630-4,740 lb)
Max. Payload: 28,380-28,330 kg (62,570-65,570 lb)

Construction
The container is constructed from anti-corrosive steel (CORTEN A, SPA-H, or equivalent) with continuous CO2 welding. It features steel frames, corrugated steel sides, double doors, and a die-stamped steel roof. The floor is made of hardwood plywood or bamboo boards. The container includes forklift pockets, lashing rings, and ventilators, all designed to meet ISO and TIR requirements.

Marking
Containers are marked according to ISO, TCT, UIC, CSC, and TIR standards, using high-tensile PVC decals and stainless steel certification plates.

Guarantee
The container structure is guaranteed for one year against defects in materials and workmanship. The paint system is guaranteed for three years against corrosion, defined as rusting exceeding RE3 on the European Scale. Decals are guaranteed for seven years against peeling, tenting, or color fading.

Catalog excerpts

STEEL DRY CARGO CONTAINER BULLBOX 20’HC - 20’ × 8’ × 9’6” MODELO NO: BULLBOX 20’ HC STANDARD DATE OF ISSUE: May 2021 Contenedores y Embalajes Normalizados S.A. P.I. Silvota, Peñasanta 12, Llanera. 33192, Asturias- Spain

Open the catalog to page 1

1.1 General This specification will cover the design, construction, materials, testing and inspection performances of 20'x8'x9'6" type steel dry cargo containers. These containers specified herein will be manufactured by Contenedores y Embalajes Normalizados, S.A (hereinafter referred to BULLBOX) under strict quality control by BULLBOX and be approved by the classification society (Bureau Veritas, China Clasification Society, Lloyd’s Register of Shipping, American Bureau of Shipping...) The container will be designed and constructed for carriage of general cargo by marine (on or below deck),...

Open the catalog to page 2

External Length Width Height Internal Length Door opening dimensions Width Internal cubic capacity 37.4 cu.m Forklift pockets Width Ratings Max. Gross Weight (R) Tare Weight (design) (T) Max. Payload (P) Dimensions and ratings are subject to small variations depending on the batch. STEEL DRY CARGO CONTAINER BULLBOX 20’HC 20’ × 8’ × 9’6” BU

Open the catalog to page 3

3. Construction The container is constructed with Anti-corrosive steel: CORTEN A, SPA-H or equivalent. The container will be constructed with steel frames, fully vertical-corrugated steel sides and front wall, horizontal-corrugated steel double doors at rear end, die- stamped steel roof and corner fittings. All welds of exterior including the base frames will be continuous welding using CO2 gas. The corner fittings will be designed in accordance with ISO 1161 and manufactured at the works approved by classification society. There is one set of forklift pocket. Each forklift pocket is built of...

Open the catalog to page 4

4. Marking The containers will be marked in accordance with ISO, TCT, UIC, CSC and TIR requirements, owner's marking specifications and other required regulations. Materials 1) Decal: - Self-adhesive, high tensile PVC film for seven (7) years guarantee without peeling off, tenting or color fading. 2) Certification plate: Stainless steel plates to be chemically etched by acid. Structure All the containers shall be guaranteed by manufacturer to be free from defects in materials, workmanship and structure for a period of one (1) year from the date of production certificate. Painting The paint system...

Open the catalog to page 5

Contenedores y Embalajes Normalizados S.A. P.I. Silvota, Peñasanta 12, Llanera. 33192, Asturias- Spain STEEL DRY CARGO CONTAINER BULLBOX 20’HC 20’ × 8’ × 9’6” B

Open the catalog to page 6

20 HC SPEC. BULLBOX

20 HC SPEC. BULLBOX

Catalog excerpts

All Bullbox catalogs and technical brochures