Scrap Attachments Auto Dismantler The BuiltriteTM, Auto Dismantling System is designed to quickly and efficiently dismantle autos, removing valuable alloys and then readying them for a car crusher or shredder. This system is recommended for 18-22 metric ton excavators with at least a two speed travel circuit. The Hold Down Arms are mounted directly to the excavator’s main frame and include a pair of large bore, high pressure cylinders, capable of applying enough force to crush and hold the auto in place. They operate off of the undercarriage drive circuit. A selector valve is supplied with the unit and is actuated by using the high speed travel shift. If the excavator does not have at least a two speed circuit, then we can supply an optional, radio remote/battery pack that shifts the valve. The Auto Dismantling Grapple features a wide opening and 360° continuous rotation, providing the operator the necessary dexterity to perform even the most precise maneuvers, making easy and quick work of pulling engines, radiators, wiring harnesses, heater cores, etc. Made from highly durable material, this tool is designed for long life and minimal maintenance. Key features include: • 360°, heavy duty rotation using a turntable bearing, hydraulic swivel and high torque motor. • High tensile steel used throughout. Abrasion resistant material and hard facing used on the tine tips. • Oversized, hardened cylinder and pivot pins. • High pressure cylinders. • Easily accessible, yet well protected grease zerks. Auto Dismantling Grapple Heavy Duty Rotation Group (360° Continuous) Heavy Duty, High Pressure Cylinders Hold Down Arms © September 2015 - Builtrite Manufacturing, Inc. - All Rights Reserved.