Stationary Electric Material Handlers Model 2300-SE BuiltriteTM, Stationary Electric Material Handlers have proven themselves in a number of waste and scrap handling applications, capable of handling a wide variety of materials. With a wide array of options, boom configurations and attachments available, let Builtrite design a material handler to maximize production at your facility. Stationary Electric Material Handlers are much less expensive to operate, safer, quieter and don’t produce emissions like diesel powered, mobile equipment. Maintenance costs are also less and the power unit can be remotely located where it is not subjected to dusty conditions, further reducing maintenance costs. Self contained version with cab and with power unit mounted on platform. 30’ (10.7M), material handling boom with orange peel grapple for loading solid waste and recyclables. Controls • Two (2) electronic joystick controls with Parker, MD4 control console. • Hand swing control with optional foot swing control. • Controls can be set to customer preference. Modular Power Source • One (1) 100 HP 460 Volt 3 Phase, Totally Enclosed, Fan Cooled (T.E.F.C.) electric motor. The Model 2300-SE utilizes approximately 40-55 Killowatts per hour, depend- ing upon the application. • One (1) 3 HP 44 volt motor for air conditioning Compressor drive. Boom Data • Horizontal Reach = 30’ (9.1M) straight, wristing styled boom or 35’ (10.7M) material handling boom. Other, custom boom lengths available. • Fabricated design, high yield steel construction. • 4” (101 mm) boom pivot, 4” (101mm) jib cylinder pin & 4” (101mm) main boom lift cylinder pins (self aligning). Electrical Package • Aluminum bronze bushings at all boom pivot points. • Starter, phase sequence monitor, control accessories group are all in Nema 4 enclosure. Boom Cylinders • Start/stop controls on control console. • Main One (1) 6.5” (165mm) bore x 41” (1,041mm) stroke • Electric slip ring when continuous rotation is required. x 4” (101mm) rod • Jib Boom - One (1) 6.5” (165mm) bore, x 32” (813mm) x Pedestal Base 4” (101mm) rod • 33” (838mm) high pedestal base with inspection port • Hydraulic stop cushions on both ends. hole. • Wear rings on both pistons and glands. • 62” (1,575mm), OD, round base plate. • Rods with heavy chrome plating. • 48” diameter, internal tooth bearing. • Accumulators on main lift cylinders to cushion shock loading. Hydraulic System • 140 Gallon (542L) hydraulic reservoir with suction Rotation System and return filters, stack type control valves with main • 6.5 RPM with single motor and gearbox swing drive. relief and safety port relief for boom function. • 48” Diameter internal tooth bearing. • Pressure load co

Operator’s Cab • 39” (990mm) x 62” (1,575mm), fully insulated, equipped with a sliding door & sliding window. • Front window wiper & washer, defroster fan & dome light. • Deluxe bucket seat. • Cab heater, air conditioner and filtering pressurizer. • Two (2) LED cab mounted work lights. • Radio, CD & MP3 player. Miscellaneous • Hydraulic Tank Filled. • Unit greased and tested prior to shipment. • Manual, centralized grease system. Options / Accessories • Remote operator controls and remote power unit options. • Air conditioning / 120 volt, electric heater. • Autolube grease system. • Rectifier...