The Builtrite, 2/3 Tine Grapple is designed to handle a wide variety of materials, from scrap steel to logs and rock. Built with T-1 Steel in its grapple arms and using AR 500 abrasion resistant tine tips, this grapple is designed to perform in extreme conditions, providing maximum durability and low maintenance, reducing your downtime. This grapple is excellent for loading and unloading stationary shears, balers and shredders. Its opposing jaw design is adept at aligning materials in the same plane, making it easier to load these machines. Key features include: • High pressure, well protected cylinders. • Heavy duty rotation using high torque motors (One on 2/3 SG 20T and two on 2/3 SG 30T) and heavy duty bearing. • Grapple arms constructed of high strength, abrasion resistant steel. Tine tips made from AR 500 plate for maximum wear resistance. • Heavy walled torque tubes run the entire width of the grapple frames, minimizing torsional (twisting) stresses. • Oversized, hardened cylinder and pivot pins. • Easily accessible, yet well protected grease zerks. If you’re looking for the toughest, most durable grapple on the market, look no further...make it a Builtrite. Scrap Grapples 2/3 Tine P/N 2/3 SG 8-28-09 Abrasion Resistant, Replaceable Tine Tips Box Tine Construction Heavy Duty Cylinder Shrouds Heavy Duty Rotation Head Heavy Walled Torque Tube

Model Weight Lbs. Kg. Open Height (A) in. mm Opening (B) in. mm Width of Individual Tines (C) in. mm Width of 3 Tine Half (D) in. mm Height @ Full Close (E) in. mm Opening @ Full Close (F) in. mm Width of Grapple From Side View (G) in. mm 2/3 SG 20T 2,400 1,091 23 584 66 1,676 6.375 162 35 889 65.5 1,664 10.9 276 32.6 828 2/3 SG 30T 3,000 1,364 24.8 630 93 2,362 6.375 162 35 889 74 1,880 14.8 376 35.6 904 2/3 SG 45T 5,300 2,409 36 914 105 2,667 7 178 39 991 90 2,286 16 406 42 1,067 2/3 Tine Grapple Specifications Northshore Manufacturing, Inc. 530 Recycle Center Drive, Two Harbors, Minnesota,...