*mydirectindustry

Catalogs
Builtrite Mfg
1300-SE Stationary Electric Material Handler

1300-SE Stationary Electric Material Handler

1 / 2 PagesView full catalog

1300-SE Stationary Electric Material Handler

Product catalog summary

Lift Capacity:

13,200 lbs at 10’ radius
8,850 lbs at 15’ radius
6,600 lbs at 20’ radius
3,350 lbs at full reach (25’0”)

Boom Data:

25’0” horizontal reach
Fabricated design with high yield steel
3” boom and 2” cylinder pins with Magnesium Bronze bushings

Boom Cylinders:

Main boom cylinder: 7” x 36” x 3” rod
Jib boom cylinder: 7” x 30” x 3” rod
Double acting with cushioned stops and heavy chrome plating

Swing System:

Continuous rotation on a 38” diameter turntable bearing
Powered by two swing motors and planetary swing drives

Power Source:

75 HP 440 Volt 3Ph T.E.F.C. electric motor

Electrical Package:

Starter phase sequence, control accessories, breaker in Nema 4 enclosure
Enclosed 4 circuit electric collector

Pedestal Base:

33” high with inspection porthole

Control Deck:

Central control console with instrumentation and start/stop controls
Foot operated swing control

Options/Accessories:

Remote operator controls and power unit options
Special grapples, cab and boom lights
Audio/visual warning system, wristing boom
Air conditioning, cab heater (12 Volt)
Automatic centralized grease system
Rectifier package for magnet
Non-continuous rotation with mechanical stops
Boom lengths from 22’4” to 27’0”
Custom paint color

Hydraulic System:

150-gallon reservoir with suction and return filters
Stack type control valves with main relief and safety port relief
Triple gear pump, hydraulic oil cooler (1HP fan motor)
2000 PSI operating system

Operators Cab:

40” x 60” fully insulated, forward sloping
Features fold-away door, sliding window, tinted windshield, wiper/washer, defroster, dome light, and bucket seat

Miscellaneous:

Hydraulic tank filled, unit greased and tested prior to shipment
Manual centralized grease system

Note: Specifications and prices are subject to change without notice.

Catalog excerpts

1300-SE Stationary Electric Material Handler-1

Lift Capacity (Less Attachment) Electrical Package Pedestal Base 13,200 Lbs @ 10Radius8,850 Lbs @ 15ҒRadius 6,600 Lbs @ 20Radius 3,350 Lbs @ Full Reach (25Ғ0) Starter phase sequence, controlaccessories group, breaker in Nema 4 enclosure, start/stop button on control console. Enclosed 4 circuit electric collector (when required.) Boom Data Boom Cylinders (25Ԓ0 Boom) Reach-Horizontal 250ҔFabricated design, high yield steel construction 3 boom and 2Ԕ cylinder pins with Magnesium Bronze bushings at all pivot points Continuous rotation on a 38diameter turntable bearing Powered by two swing motors and planetary swing drives 33Ԕ High pedestal base withinspection porthole Power Source Control Deck Central control console withinstrumentation and start/stop controls Foot operated swing control One (1) 7 x 36Ԕ x 3 rod-Mainboom cylinder One (1) 7Ԕ x 30 x 3Ԕ rod-Jib boom cylinder Double acting heavy wall, honedsteel tubing, with cushioned stops Heat treated cylinder rods with heavy chrome plating Heat treated cylinder rods with heavy chrome plating One (1) 75 HP440 Volt 3PhT.E.F.C. electric motor >

Open the catalog to page 1

All Builtrite Mfg catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list