Structural design analysis of reinforced concrete beams & oor slabs Within ConCrete’s user-friendly environment, you dene model geometry, cross-sections, (elastic) supports and loads interactively. Through a few mouse clicks, you can easily change any design parameter. Instantly, all related analysis results (from internal forces up to reinforcement diagrams) will be updated automatically - maintaining full associativity between analysis data and results. ConCrete performs organic design calculations based on the behaviour of structural members in ultimate and serviceability limit states. All of this complies with Eurocode 2 and a wide range of national standards. ConCrete provides you with a complete solution - standard. It offers you structural and loads modeling capabilities, static analysis, limit state design verication and the creation of reinforcement plans and cutting lists. ConCrete instantly provides you with deformations (considering the effects of cracks and creep), internal forces, reinforcement requirements, ... and presents all of this in clear graphs. Results of design verications are translated into reinforcement plans and cutting lists.

Extremely attractive and comfortable user interface with oating toolbars, project navigation tree and interactive windows for denition of geometry, boundary conditions and loads. Automated creation of loads combinations according to EC1 and national standards. Static analysis of reinforced concrete beams, oor plates, ground beams and rafts. Evaluation of longitudinal and transverse reinforcement requirements - according to EC2 and national standards. Evaluation of minimal and optimal cross-sectional dimensions. Evaluation of cracked deformation based on required and/or actual reinforcement quantities,...