MDS Programmable Shape Machine
1 / 6Pages

Catalog excerpts

MDS Programmable Shape Machine - 1

MDS - PROGRAMMABLE SHAPE MACHINE MDS - PROGRAMMABLE SHAPE MACHINE MDS / HI-FLEX / PROGRAMMABLE SHAPE PLASMA CUTTING / WELDING KIT FMD-4500 (120 VAC) DESCRIPTION Hi-Flex Rail w/ (8) FMD-2010 R.E. On/Off Magnets Torch Holder Assembly Hand Held Terminal Shape Control Module Weld Contact Cable 25' (7.6 m) Master Drive Unit, 120 VAC Handle w/ Cable Anchor Hi-Flex Carriage Linear Weaver w/ 40" (1 m) Long Arm Speed Control MDS PROGRAMMABLE SHAPE MACHINE 3 Year Warranty Made in USA PORTABLE, TWO AXIS SHAPE MACHINE CUTS IN ALL POSITIONS Stop/ Pause Wireless serial connection set for use with PC Option software FMD-4502 (240 VAC) Same as FMD-4500 except with: Master Drive Unit, 240 VAC FMD-4504 (42 VAC) Same as FM-4500 except with: Master Drive Unit, 42 VAC Manual Jog Y Axis Computer Software The MDS-Programmable Shape Machine can be programmed from a PC, using either of two software packages described below. Shapes can be created offline, and downloaded to the machine when required. A cable is supplied to connect to the serial port of the PC. Hi-Flex Rail w/ (8) FMD-2010 R.E. On/Off Magnets Torch Holder Assembly Hand Held Terminal Shape Control Module 120 VAC MDS Solenoid Kit Master Drive Unit, 120 VAC Handle w/ Cable Anchor Hi-Flex Carriage Linear Weaver w/ 40" (1 m) Long Arm Technical Data: Power Requirements: 120 VAC / 50-60 Hz / 1 Ph 240 VAC / 50-60 Hz / 1 Ph 42 VAC / 50-60 Hz / 1 Ph 1. PC Option / BUG-6140 This runs under Windows, and allows you to: • Create shapes on the PC. • ave any number of shapes to disk, and retrieve S them as necessary. • View a programmed shape on screen - which helps program verification. • Download programmed shapes from the PC to the machine. Travel Speed: FMD-4552 (240 VAC) Same as FMD-4550 except with: 240 VAC MDS Solenoid Kit Master Drive Unit, 240 VAC FMD-4554 (42 VAC) Same as FMD-4550 except with: 42 VAC MDS Solenoid Kit Master Drive Unit, 42 VAC 5-100 ipm (127-2540 mm/min) 2. BUG-6240 CAD Interface This is a complete package that includes both the Net Weight of Kit: 45 lbs. (20.41 kg) PC option and DeskCNC. This will allow you to take 2 dimensional CAD drawings and convert them to Cross Travel: 24" (610 mm) Shape files that you can directly load into your shape machine. Max. Line Segment • DeskCNC is used to modify 2 dimensional CAD Dimension: 72" (1828 mm) drawings (.DXF files) and create a toolpath Within Limits of Travel • The toolpath is saved as a shape file using Min. Increment DeskCNC Dimension: .01" (0.3 mm) • The shape file can be loaded in the PC option for easy integration with the shape machine Delay Increment: .01 seconds A QUALITY PRODUCT FROM BUG-O SYSTEMS • 280 TECHNOLOGY DRIVE • CANONSBURG, PA USA 15317-9564 A DIVISION OF WELD TOOLING CORPORATION © Weld Tooling Corp. ROM 1:16 Litho. in U.S.A. LIT-MDSPSM-BRO-1014 Bug-O Systems Automated Cutting and Welding Systems 412-331-1776 www.bugo.com Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do.

Open the catalog to page 1
MDS Programmable Shape Machine - 2

MDS - PROGRAMMABLE SHAPE MACHINE The machine has storage capacity in memory for 20 different programmed shapes. All programming is done with the provided handheld terminal. The terminal can be plugged into the connector on the rear of the machine or unplugged at any time. The terminal is not needed to run the machine once programmed. The MDS Programmable Shape Machine is a two-axis machine that runs on a track and carries a torch on a motorized cross-arm. It can be used for flame cutting, plasma cutting or welding a variety of shapes which are programmed and stored in memory. The system can...

Open the catalog to page 2
MDS Programmable Shape Machine - 3

MDS - PROGRAMMABLE SHAPE MACHINE The machine has storage capacity in memory for 20 different programmed shapes. All programming is done with the provided handheld terminal. The terminal can be plugged into the connector on the rear of the machine or unplugged at any time. The terminal is not needed to run the machine once programmed. The MDS Programmable Shape Machine is a two-axis machine that runs on a track and carries a torch on a motorized cross-arm. It can be used for flame cutting, plasma cutting or welding a variety of shapes which are programmed and stored in memory. The system can...

Open the catalog to page 3
MDS Programmable Shape Machine - 4

MDS - PROGRAMMABLE SHAPE MACHINE The machine has storage capacity in memory for 20 different programmed shapes. All programming is done with the provided handheld terminal. The terminal can be plugged into the connector on the rear of the machine or unplugged at any time. The terminal is not needed to run the machine once programmed. The MDS Programmable Shape Machine is a two-axis machine that runs on a track and carries a torch on a motorized cross-arm. It can be used for flame cutting, plasma cutting or welding a variety of shapes which are programmed and stored in memory. The system can...

Open the catalog to page 4
MDS Programmable Shape Machine - 5

MDS - PROGRAMMABLE SHAPE MACHINE MDS - PROGRAMMABLE SHAPE MACHINE MDS / HI-FLEX / PROGRAMMABLE SHAPE PLASMA CUTTING / WELDING KIT FMD-4500 (120 VAC) DESCRIPTION Hi-Flex Rail w/ (8) FMD-2010 R.E. On/Off Magnets Torch Holder Assembly Hand Held Terminal Shape Control Module Weld Contact Cable 25' (7.6 m) Master Drive Unit, 120 VAC Handle w/ Cable Anchor Hi-Flex Carriage Linear Weaver w/ 40" (1 m) Long Arm Speed Control MDS PROGRAMMABLE SHAPE MACHINE PORTABLE, TWO AXIS SHAPE MACHINE CUTS IN ALL POSITIONS Stop/ Pause Wireless serial connection set for use with PC Option software FMD-4502 (240...

Open the catalog to page 5
MDS Programmable Shape Machine - 6

MDS - PROGRAMMABLE SHAPE MACHINE MDS - PROGRAMMABLE SHAPE MACHINE MDS / HI-FLEX / PROGRAMMABLE SHAPE PLASMA CUTTING / WELDING KIT FMD-4500 (120 VAC) DESCRIPTION Hi-Flex Rail w/ (8) FMD-2010 R.E. On/Off Magnets Torch Holder Assembly Hand Held Terminal Shape Control Module Weld Contact Cable 25' (7.6 m) Master Drive Unit, 120 VAC Handle w/ Cable Anchor Hi-Flex Carriage Linear Weaver w/ 40" (1 m) Long Arm Speed Control MDS PROGRAMMABLE SHAPE MACHINE 3 Year Warranty Made in USA PORTABLE, TWO AXIS SHAPE MACHINE CUTS IN ALL POSITIONS Stop/ Pause Wireless serial connection set for use with PC...

Open the catalog to page 6

All BUG-O SYSTEMS catalogs and technical brochures

  1. UNI-BUGS

    4 Pages

  2. BEVELERS

    2 Pages

  3. GO-FER® IV

    6 Pages

  4. Arc Gouger

    4 Pages

  5. Trac-Bug

    2 Pages

  6. Uni-bug III

    4 Pages

  7. Unibug II

    4 Pages

  8. Beam Bug III

    4 Pages

  9. Con-o

    2 Pages

  10. Cir-o

    2 Pages

  11. Hob-o

    2 Pages

  12. Torches

    2 Pages

  13. Go-fer III

    6 Pages

  14. TAR-GIT

    2 Pages

  15. Pipe-Bug

    4 Pages

Archived catalogs