Affordable Automation for Welding, Cutting and Semi-Automatic Processes HOB-O BLIND AREA KIT Make smooth accurate cuts while eliminating blind area interference. *Torch not included. Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. The HOB-2080 BLIND AREA KIT allows you to cut holes from 8" up to 14 1/2" (203 to 368 mm) when using the DC HOB-O PRECISION HOLE BORER, BEVELER AND WELDER. It is lightweight and attaches easily on the machine. Set the hole radius, light the torch, start your cut and hit the switch to make smooth accurate holes in any position, virtually eliminating the need for grinding and touchup. PATENTS WORLDWIDE A DIVISION OF WELD TOOLING CORPORATION 280 TECHNOLOGY DRIVE CANONSBURG, PENNSYLVANIA 15317-9564 USA PHONE: 1- 412-331-1776 http://www.bugo.com FAX: 1- 412- 331- 0383

HOB-O BLIND AREA KIT To install a Blind Area Kit on a HOB-O: 1. Remove 3 Ring Bolts (A). Caution – be sure to keep Ring Spacers (B) in the correct position – over the holes in the Ring Gear. 2. Install new Magnet Ring (C) with 4 CON1005 Legs (D) facing away from Ring Gear. Reinstall the 3 Ring Bolts (A) through Spacers (B) and tighten securely. 3. Install the 4 Offset Leg and Magnet Foot Assemblies (E). NOTE: These may be rotated to any position and locked using the screw provided (F). 4. Replace original 6" Center Pin with the new HOB-2081 Center Pin (G). 5. Install an adjustable Tip Adaptor...