Go-fer III
1 / 6Pages

Produce machine quality welds and cuts in any plane or position with a portable drive on magnetic track GO-FER III ACCESSORIES GOF-3255 Welding Support Kit GOF-3142 Radius Cutting Attachment: Enables GO-FER III to be quickly changed from a straight line to a circlecutting machine. BUG-5166-8 H.D. Tube Rack w/Clamp Size Range: 8" to 96" (203 mm to 2438 mm) diameter. The versatile GO-FER III Kits make straight line welding and cutting more efficient and economical. and cutting more efficient and economical The addition of these 4 items provides a vertical racking motion for hand held guns. Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. Panograph Assemblies Dual Torch Units Panographs are spring-loaded devices that maintain torch stand-off and compensate for plate surface irregularities. Dual torch units are available upon request. ARR-1090 Rail Alignment Tool Gauging device for rapid alignment of rails to joint Rails & Attachments ARR-1085 4' (1.18 m) Heavy Duty Rigid Rail ARR-1080 8' (2.37 m) Heavy Duty Rigid Rail BUG-5485 Contactor/Cable Anchor: Provides built-in contactor switch to control plasma or welding process. The Cable Anchor provides strain relief for all cables. AFR-3000 Semi-Flex Rail can be bent inside or outside to a minimum radius of 15' (5.0 m) or 30' (10.0 m) diameter without permanent deformation. AFR-2010 Swivel Magnet for AFR-3000 Rail only. 250 lbs. Holding Power ARM-2015 Spacer Bar for ARR Rail only. PAN-1007 Welding Panograph Assembly ARM-2010 On-Off Magnet Plate Assembly for ARR Rail only. Holding power 250 lbs. (113.4 kg) Can be switched on and off for rapid set-up. PAN-1010 Cutting Panograph Assembly Vacuum Systems For Non-Ferrous Metals Standard Vacuum Support Kits: ARV-1080 Vacuum Kit For ARR-1080 & AFR-3000 Rails. ARV-1085 Vacuum Kit For ARR-1085 Rails. Custom systems are required for Bent Rail. ARV-2020 120 Volt/50-60 Hz ARV-2030 220 Volt/50-60 Hz The ARV-2020 (ARV-2030) Vacuum Pump Kit is recommended for use with a maximum of four (4) pieces of rail, or sixteen (16) vacuum bars. ARV-1080 Vacuum Kit for ARR-1080 8' (203 mm) Rigid Rail. ARV-1085 Vacuum Kit for ARR-1085 4' (102 mm) Rigid Rail. ARV-1080 Vacuum Kit for AFR-3000 8' (203 mm) Semi-Flex Rail. A QUALITY PRODUCT FROM BUG-O SYSTEMS • 280 TECHNOLOGY DRIVE • CANONSBURG, PA 15317-9564 USA A DIVISION OF WELD TOOLING CORPORATION © Weld Tooling Corp. ROM 1:16 Litho in U.S.A. LIT- GOFER-BRO-0313 Bug-O Systems Affordable Track Cutting and Welding Systems

GO-FER III OXY-FUEL KIT / GOF-3250-OX The GO-FER III Oxy-Fuel Kit is used for straight line cuts and weld preparation beveling. The kit comes complete with the exception of a torch. The Bug-O Torch Holder will accept any standard 1-3/8" (35 mm) diameter machine torch with a 32 pitch gear rack. The Quick-Action Gas Manifold mounted to the rear of the machine is used as a strain reliever for the torch and also gives the operator the ability to turn on and off the pre-heat gases without having to readjust the gas flow of the torch. GO-FER III WELDING KIT / GOF-3250-WD The Go-Fer III Welding...

GO-FER III OXY-FUEL KIT / GOF-3250-OX The GO-FER III Oxy-Fuel Kit is used for straight line cuts and weld preparation beveling. The kit comes complete with the exception of a torch. The Bug-O Torch Holder will accept any standard 1-3/8" (35 mm) diameter machine torch with a 32 pitch gear rack. The Quick-Action Gas Manifold mounted to the rear of the machine is used as a strain reliever for the torch and also gives the operator the ability to turn on and off the pre-heat gases without having to readjust the gas flow of the torch. GO-FER III WELDING KIT / GOF-3250-WD The Go-Fer III Welding...

GO-FER III OXY-FUEL KIT / GOF-3250-OX The GO-FER III Oxy-Fuel Kit is used for straight line cuts and weld preparation beveling. The kit comes complete with the exception of a torch. The Bug-O Torch Holder will accept any standard 1-3/8" (35 mm) diameter machine torch with a 32 pitch gear rack. The Quick-Action Gas Manifold mounted to the rear of the machine is used as a strain reliever for the torch and also gives the operator the ability to turn on and off the pre-heat gases without having to readjust the gas flow of the torch. GO-FER III WELDING KIT / GOF-3250-WD The Go-Fer III Welding...

Produce machine quality welds and cuts in any plane or position with a portable drive on magnetic track GO-FER III ACCESSORIES GOF-3255 Welding Support Kit GOF-3142 Radius Cutting Attachment: Enables GO-FER III to be quickly changed from a straight line to a circlecutting machine. BUG-5166-8 H.D. Tube Rack w/Clamp Size Range: 8" to 96" (203 mm to 2438 mm) diameter. The versatile GO-FER III Kits make straight line welding and cutting more efficient and economical. and cutting more efficient and economical The addition of these 4 items provides a vertical racking motion for hand held guns....

Produce machine quality welds and cuts in any plane or position with a portable drive on magnetic track GO-FER III ACCESSORIES GOF-3255 Welding Support Kit GOF-3142 Radius Cutting Attachment: Enables GO-FER III to be quickly changed from a straight line to a circlecutting machine. BUG-5166-8 H.D. Tube Rack w/Clamp Size Range: 8" to 96" (203 mm to 2438 mm) diameter. The versatile GO-FER III Kits make straight line welding and cutting more efficient and economical. and cutting more efficient and economical The addition of these 4 items provides a vertical racking motion for hand held guns....