Automated Cutting and Welding Systems AUTOMATIC HEIGHT CONTROL The BUG-6553 integrated into the Universal Bug-O-Matic. (Factory installed option) The CAS-2100 integrated into the Free Standing Torch Support. The CAS-2060 integrated into the MDS Pendulum Weaver System. The CAS-2050 can be used with the MDS Linear Weaver System or the MDS Straight Line Welding System. , Bug-O Systems AUTOMATIC HEIGHT CONTROL is a compact, easy to use accessory designed to maintain a constant welding torch-to-work distance. This control can be used with Sub Arc, Flux-Core and MIG welding. It includes a solid-state control box and a motorized slide which will bolt onto any standard Bug-O Systems carriage or fixture. It can be used for a wide variety of welding applications where precise control of welding current is critical. This system requires a constant voltage (CV) power supply for operation. Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. A DIVISION OF WELD TOOLING CORPORATION 280 TECHNOLOGY DRIVE CANONSBURG, PENNSYLVANIA 15317-9564 USA PHONE: 412-331-1776 http://www.bugo.com FAX: 412- 331- 0383

AUTOMATIC HEIGHT CONTROL Maintaining constant welding current (arc length) is critical for producing consistent, quality welds. BUG-O Systems Automatic Torch Height Control (AHC) is your solution. Automatic height sensors monitor welding current and adjusts torch height in response to changes in the current. Maintaining a constant weld tip to work piece distance produces uniform weld penetration and controlled heat input. BUG-O's AHC can be installed on any welding device. It works with any constant voltage (CV) welding power source and is compatible with SAW, FCAWand GMAW Welding If needed,...