Fill off liquids - but do it safely!
4Pages

{{requestButtons}}

Catalog excerpts

Fill off liquids - but do it safely! - 1

Pumps | Sampling | Plastic Labware for Laboratory, Industry, Science TOPSELLERS DISPENSING LIQUIDS – BUT DO IT SAFELY! Safety is the number one priority Hazardous liquids must never be filled off by pouring them out directly. Even the use of a funnel does not provide the required degree of safety when filling off hazardous liquids. } Increased accident risk by slipping on dirty floors } Skin diseases or poisoning by spilt hemicals c } Health hazard from harmful vapors Safety during filling off must be the number one priority – for your own ersonal protecp tion! This means that purchasing a suitable pump for filling off hazardous liquids is an investment in the safety and health of your employees which pays for itself in a very short time. OTAL hand pumps | to fit most commercial storage drums The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers. ` Particularly compact, space-saving hand pump ` Good pump capacity ` With universal bungs made of soft PVC, for container openings of 30–70 mm (1.18–2.76 in.) Ø Pump capacity l/min (gpm) ` elivery tubes made of PP, resistant to D weak acids, alkalis and detergents ` elivery tubes made of PVDF, suitable for D acids and alkalis, not for heavily oxidising acids and alkalis. Resistant to chlorine bleach ` elivery tubes made of stainless steel D 304, for liquids that are not easily combustible in Hazard Category AIII (VbF) Delivery tube made of PP Delivery tube made of PP Delivery tube made of PP Delivery tube made of PVDF Delivery tube, stainless steel AISI 304 Delivery tube PP, discharge hose PVC OTAL mini pump, delivery tube PP

Open the catalog to page 1
Fill off liquids - but do it safely! - 2

TOPSELLERS OTAL foot pumps | high performance, sturdy, for industrial use ` ery good pump capacity due to large voluV me foot bellows ` With universal bungs for container penings o of 1.2 – 2.8 inch diameter ` elivery tubes made of PP, resistant to D weak acids, alkalis and detergents Pump capacity l/min (gpm) ` Delivery tubes made of PVDF, particularly for acids and alkalis, not for heavily oxidising acids and alkalis. Resistant to chlorine bleach ` elivery tubes made of stainless steel D 304, for liquids that are not easily combustible in Hazard Category AIII (VbF) flammable) Delivery...

Open the catalog to page 2
Fill off liquids - but do it safely! - 3

TOPSELLERS Stainless steel barrel pump | for flammable liquids Version Immersion depth cm (in.) 1 with discharge tube 36 (14.17) 1 with discharge tube 57 (22.44) 1 with discharge tube 91 (35.83) 2 with discharge hose 36 (14.17) 2 with discharge hose 57 (22.44) 2 with discharge hose 91 (35.83) Anti-static set, prevents electrostatic build-up PP barrel pump | robust industrial quality Seals made of PTFE Immersion tube Ø 32 mm (1.26 in.) Capacity up to approx. 12 l/min (3.17 gpm) For barrels and tanks of 30–1000 litres (7.93–264.17 gallons) B arrel screw joint as accessory The good chemical...

Open the catalog to page 3
Fill off liquids - but do it safely! - 4

Burkle Inc. 155 Keyland Court | Bohemia, NY 11716 Phone +1-631-750-3772 Fax +1-631-750-3773 info@burkle-inc.com | www.burkle-inc.com TOPSELLERS Mini solvent pump Drum holder The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 liters (2.64 gallons). For reliable filling and dosing of solvents and readily flammable liquids. The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. } Stainless steel AISI 304 } For...

Open the catalog to page 4

All Bürkle catalogs and technical brochures