EX protection products
1 / 4Pages

Pumps | Sampling | Plastic Labware for Laboratory, Industry, Science TOPSELLERS EX PROTECTION PRODUCTS Safety during filling and sampling processes – EX protection products from Burkle Invisible dangers are lurking during filling and sampling processes: electrostatic charge, which can trigger a fire or explosion with a spark. The greatest risk comes from unsuitable filling devices and sample equipment. Safe devices must be electrically conductive. The percentage of non-conductive parts is limited by legal restrictions. EX-protected pumps and samplers from Burkle have been thoroughly tested by an independent organisation, as verified by a testing seal. In combination with the antistatic set which ensures reliable grounding, and taking into consideration applicable requirements regarding hazardous materials, you can work safely and with no danger with our instruments presented here. Stainless Steel Barrel Pump | for flammable liquids Stainless steel barrel pump - discharge tube Barrel pump made of stainless steel with discharge tube. ` Immersion tube Ø 32 mm (1.26 in.) ` Removable discharge tube Stainless steel barrel pump - discharge hose/stopcock Barrel pump stainless steel with discharge hose and stopcock made of stainless steel and PTFE, can conduct electricity. Assessment of Ignition Risks, usable in: Zones 0 and 1 Explosion groups II A, II B ` Immersion tube Ø 32 mm (1.26 in.) ` Removable hose, 1.2 m (3.94 ft.) in length ` all valve made of stainless steel NW 8 mm B Stainless steel barrel pump - discharge tube      Pump capacity ml per stroke (oz.) 190 (6.42) 330 (11.16) 540 (18.26) Stainless steel barrel pump - discharge hose/stopcock        Pump capacity ml per stroke (oz.) 190 (6.42) 330 (11.16) 540 (18.26)

TOPSELLERS Mini solvent pump The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres (2.64 gal.). For reliable filling and dosing of solvents and readily flammable liquids. The hand pump works according to the excess pressure principle. In this way only the hose, pumping tube and discharge come in contact with the liquid being filled. To ensure safety, a pressure relief valve protects the solvent pump against excessive pressure build-up. Assessment of Ignition Risks, usable in: Zones 0 and 1 Explosion groups II A, II...

TOPSELLERS Dipping vessel Zones 0 and 1 Explosion groups II A, II B, II C Use 1. hen the dipping vessel is lowered, the W liquid constantly runs through it. 2. hen it is pulled back, both valves close W automatically. 3. Emptying at the top via the open flaps. ` With Easy-Flow, the flow optimized flow valve ` High weight for faster lowering ` Contents 1000 ml (33.81 oz.) ` Height with handles 427 mm (16.81 in.) ` Made of non-spark producing brass or stainless steel AISI 304 (1.4301) for Ex area ` Tested for use in the Ex protection zone 0, Explosion Categories IIA, IIB and IIC Assessment of...

Burkle Inc. 155 Keyland Court | Bohemia, NY 11716 Phone +1-631-750-3772 Fax +1-631-750-3773 info@burkle-inc.com | www.burkle-inc.com Compact jerrycan, electroconductive ` HDPE, black, anti-static Assessment of Ignition Risks, usable in: ` With or without threaded Zones 0 and 1 Explosion groups II A, II B, II C connector 3/4” ` anister support made of alu- C minium for secure stand as accessory (only for 5 l (1.32 gal.) e n t e st e d canister) 5 ti f i c 01 K DE The space-saving canister, made of electrically conductive HDPE, is especially well suited for use in explosion-proof areas. With...