DATA SHEET 3/2 or 4/2 way Solenoid Valve for pneumatics • Compact design in 3/2 and 4/2 way versions • Extendable valve block • Reduced power consumption • Different pneumatic connections available • Robust construction Product variants described in the data sheet may differ from the product presentation and description. Type description Type 2012  Pneumatically operated 2/2 way globe valve CLASSIC Type 2516 Cable plug DIN EN 175301-803 1000390870 | Standard | EU | en | 201905 | 00 © Christian Bürkert GmbH & Co. KG, Subject to alteration Valves of type 5470 consist of a type 6106 pilot rocker solenoid valve and a pneumatic valve. An armature with a tilting bearing, similar o a rocker, tilts within the body of the pilot valve, and switches the valve. The minimal tilting movement of the rocker is non-wearing, and basic lubrication is unnecessary. The type 5470 R is available as a 3/2 and 4/2 way valve. The valves can be mounted together individually using the module flange. In various applications, they can be used advantageously as valve blocks. Different variants are available for service ports 2 and 4. Visit produ

Table of contents 1. General technical data 4. Product design and assembly Visit product website

1. General technical data Product properties Materials Body Inner valve parts Seal material Weight Nominal diameter Nominal operating mode Electrical data Operating voltage Voltage tolerance Electrical power consumption Performance data Pressure range QNn value air Electrical nominal power Switching times Medium data Operating media Medium temperature Approvals and certificates Protection class Type of protection Product connections Electrical connection Pressure ports 1 and 3 Pressure ports 1 and 3 Working ports 2 and 4 (variants) Environment and installation Ambient temperature Accessories...

2. Circuit functions Circuit function Description Type: C, solenoid valve 3/2 way Servo-assisted Normally closed Type: D, solenoid valve 3/2 way Servo-assisted Normally open Type: G, solenoid valve 4/2 way Servo-assisted Normally open 3. Dimensions 3.1. Dimensions variants for port connection 1 3.2. Dimensions variants for port connection 2 (working ports) Note: Dimensions in mm Visit product website  

3.3. Dimensions block installation with 18 mm extendable valves on a single base module Structure with connector lugs at side Note: • Dimensions in mm • Electrical connection rectangular plug with 2 pins (cable plug Type 2505 cable and wire version) Block installation 20 Depending on working port Visit product website  

Structure with connector lugs at top Note: • Dimensions in mm • Electrical connection with connector lugs (cable plug Type 2516 protection class IP65 DIN EN 175301 - 803) Block installation Single valve Depending on working port Depending on working port 3.4. Dimensions block installation with 19 mm extendable valves on pneumatic modules Type MP05 Structure with connector lugs at side Note: Dimensions in mm 19 32.5 35.5 Depending on working port Visit product website 

4. Product design and assembly 4.1. Product structure servo-assisted valve 9 Element Manual override Port connection 2 Working port 2 (B) Working port 4 (A) Pressure supply 1 (P) Port connection 1 (FM07 = not equipped) Exhaust 3 (R) Amplifier Pilot control standard Plug contacts at side Connection variants for port connection 1 LTA1 = port connection 1 Base module Base module with check valve in R channel Hose screw connection SL 6/4 mm Visit product website  

Connection variants for port connection 2 (working ports) Note: The corresponding properties of the connection variants can be found in the table at the end of the chapter. Variant B Plug-in coupling Ø 6mm Namur for throttle screws Variant B Variant D Plug-in coupling Ø6 mm Namur for throttle screws Circuit function C Variant Variant A Variant B Variant C Variant D Variant E Variant F Variant G Circuit function D Properties Plug-in coupling Ø 6 mm at bottom (circuit function C) Plug-in coupling Ø 6 mm at side and sleeve G ⅛ or NPT ⅛ with throttle check valve Plug-in coupling Ø 6 mm at bottom...

Electrical connection with plug for extendable valves (cable plug Type 1057 for individual wiring) Cable plug Type 1057 can be selected with plug configuration at top (see “Connection variants for port connection 2 (working ports)” on page 8). The main prerequisite is that the base module is selected for width/station 18 mm. Neutral and protective conductors are looped through and connected centrally once. When connecting the valves, only the control line to each valve must be installed. The neutral and protective conductors are integrated in the cable plug. The major advantage of this system...

4.2. Product structure block installation with 18 mm extendable valves on individual base module Structure with connector lugs at side 1 Element Connection module on left Extendable valves Intermediate feed (for different pressures) Extendable valves Connection module on right Structure with connector lugs at top Visit product website   Element Connection module on left Extendable valves Intermediate feed (for different pressures) Extendable valves Connection module on right

4.3. Product structure block installation with 19 mm extendable valves on pneumatic modules Type MP05 Structure with connector lugs at side Note: • Variant with connector lugs at top: Individual wiring also possible • Electrical connection with connector lugs (cable plug Type 2516 protection class IP65 DIN EN 175301 - 803) 1 Element Connection module, on left Base module, 3x Type MP05 Connection module on right as intermediate module (supply channels pushed through or sealed; different pressure supply P1, P2…is possible) Base module, 2x Type MP05 Connection module, on right Exhaust channel: 3...

5.3. Ordering chart Extendable single valves with module flange for pressure ports 1 (P) and 3 (R) with connector lugs at top Note: • Further variants on request • Delivery does not include cable plug (see “5.4. Ordering table accessories” on page 13) • Details on the illustrated circuit functions see “2. Circuit functions” on page 4 The following applies to all the variants listed below: • Nominal width: .0 mm 4 • QNn value air: 300 l/m • Pressure range: 2...10 bar Circuit function Voltage/Frequency Effective coil power [V/Hz] [W] 24/DC/UC 2 Type: C, solenoid valve 3/2 way Servo-assisted Normally...