Type 201 Direct-acting, Sub-base Advantages/Benefits DTS 1000010915 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 ► Normally closed ► Body material: brass ► Short response times ► Compact design Design/Function Applications Type 201 is a normally-closed direct-acting plunger-type solenoid valve. When energized, the solenoid armature is drawn in against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil. • Neutral gases and liquids • Pneumatic control • Vacuum • Shut-off, dosing, filling and ventilating • Small scale devices, laboratory and measuring technology • Gas control, welding technology biirkert Fluid Control Systems

Type 201 Technical Data Circuit Function A 2/2-way valve, normally closed Specifications Body Material Body and seat of brass Stainless steel Valve internals 1.4105, 1.4571 Orifice DN [mm] 1) Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve at +20 °C., 2) Also suitable for vacuum. All pressures quoted are gauge pressures with respect to the prevailing atmospheric pressure. DTS 1000010915 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 Operating Data (Valve) Operating Data (Actuator) Seal Materials/Fluids Handled/Temp.- Range Operating...

2/2-Way Miniature Solenoid Valve Dimensions in mm DTS 1000010915 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 Manifold Mounting The manifolds for 1 to 6 valves have a common pressure inlet and individual outlet for each valve. Type 201 may also be mounted together with Type 301 valves (circuit function C, de-energized, outlet A exhausted) on the same manifold. The electrical connection can be either to the right or left of the manifold. Manifolds may be coupled together using special push-fit O-ring connecting nipples for linking the pressure inlets P. Manifolds...

2/2-Way Miniature Solenoid ValveOrdering Chart (Other Versions on Request)DTS 1000010915 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 Circuit Function 11 Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve at +20 °C, 2) also suitable for vacuum, 3) for analysis, 4) 2 W power consumption. In case of special requirements please consult for advice. We reserve the right to make technical changes without notice.