*mydirectindustry

Type 0200

Product catalog summary

Overview
The Miniature Solenoid Valve Type 200 is a direct-acting plunger-type valve that is normally closed by spring action. It is designed for use with neutral gases and liquids, pneumatic control, vacuum applications, and more. The valve features a compact design and short response time, making it suitable for small-scale instruments and laboratory technology.

Specifications
- Body Materials: Brass, Stainless Steel
- Seal Materials: NBR, FPM
- Operating Voltages: AC 24, 230, 240/50 Hz; DC 12, 24 V
- Voltage Tolerance: ±10%
- Power Consumption: AC 9 VA (inrush), 6 VA/4 W (hold); DC 4 W
- Duty Cycle: 100% continuously rated
- Max Ambient Temperature: +55 °C
- Max Viscosity: Approx. 21 mm²/s

Performance
- Response Times: Opening 5-18 ms, Closing approx. 8 ms
- Pressure Range: 0-21 bar depending on orifice size
- Flow Rates: Vary by orifice size, with Kv-Values ranging from 0.045 to 0.13 m³/h

Design and Function
The valve operates by energizing the solenoid, which draws the armature against a spring to open the valve. It features epoxy encapsulation for efficient heat dissipation.

Installation and Accessories
The valve can be installed in any position, though an upright solenoid system is preferred. Electrical connections can be made via cable connection without a plug, or with moulded-in cables upon request.

Applications
Suitable for shut-off, dosing, filling, ventilating, gas control, and welding technology.

Ordering Information
The valve is available in various configurations with different orifice sizes, body materials, and seal materials. Specific order numbers are provided for each configuration.

Catalog excerpts

Miniature Solenoid Valve Type 200 2/2-Way, Direct-acting, G1/8 - M5 Advantages/Benefits DTS 1000010912 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 ► Normally closed ► Body materials: brass, stainless steel ► Short response time ► Compact design Design/Function Applications Type 200 is a direct-acting plunger-type solenoid valve normally closed by spring action (circuit function A). When energized, the solenoid armature is drawn against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil. • Neutral gases and liquids • Pneumatic control • Vacuum • Shut-off, dosing, filling, ventilating • Small-scale instrument, laboratory and measurment technology • Gas control, welding technology biirkert Fluid Control Systems

Open the catalog to page 1

Miniature Solenoid ValveTechnical Data Circuit Function A 2/2-way valve, normally closed Body Materials Brass body and seat Stainless steel Valve internals 1.4105, 1.4571 DTS 1000010912 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 Seal Materials/Fluids Handled/Temp. Range Operating voltages NBR Neutral fluids, e.g. compressed air, town gas, water, hydaulic oils -10 to +90 °C Voltage tolerance 1) Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve at +20 °C. 2) Also suitable for vacuum. All pressures quoted are gauge pressures...

Open the catalog to page 2

DTS 1000010912 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017

Open the catalog to page 3

Circuit Orifice Flow Rate Water Kv-Value Port Connection Pressure Body Range Material Seal Material Voltage/ Frequency DTS 1000010912 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 [mm] 1) Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve at +20°C, 2) 2 W power consumption, 3) analysis version

Open the catalog to page 4

Circuit Orifice Flow Rate Water Kv-Value Port Connection Pressure Body Range Material Seal Material Voltage/ Frequency DTS 1000010912 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 [mm] 11 Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve at +20°C, 21 2 W power consumption, 31 analysis version

Open the catalog to page 5

Miniature Solenoid ValveOrdering Chart (Other Versions on Request) Circuit Orifice Flow Rate Water Kv-Value Port Connection Pressure Body Range Material Seal Material Voltage/ Frequency DTS 1000010912 EN Version: A Status: RL (released | freigegeben | valide) printed: 22.09.2017 1) Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve at +20°C, 2) 2 W power consumption, 3) analysis version In case of special requirements please consult for advice. We reserve the right to make technical changes without notice.

Open the catalog to page 6

All BÜRKERT FLUID CONTROL SYSTEMS catalogs and technical brochures

Archived catalogs

Type 6281
21 Pages
6281
13 Pages