*mydirectindustry

Type 0117

Product catalog summary

Overview: The document describes the Type 117 solenoid valve, a normally-closed, direct-acting plunger-type valve with a PTFE-coated diaphragm. This diaphragm isolates the fluid from the solenoid system, ensuring efficient operation and heat dissipation through solenoid epoxy encapsulation.

Key Features:

Compact design with low electrical power consumption.
Short response times and hermetically sealing isolating diaphragm.
Non-metallic valve internals for enhanced durability.

Technical Specifications:

Body Material: ETFE (TEFZEL)
Seal Material: PTFE with EPDM or FKM
Media Compatibility: PTFE/EPDM for alkalis and acids; PTFE/FKM for oxidizing acids and substances.
Temperature Range: Medium -10 to +70 °C; Ambient max. +55 °C
Max Viscosity: 21 mm²/s
Response Times: Approx. 20 ms for both opening and closing
Installation: Preferably upright
Operating Voltages: 12 V DC, 24 V DC, 220-230 V UC
Voltage Tolerance: ± 10%
Power Consumption: 4 W
Duty Cycle: 100% continuously rated
Cycling Rate: Up to 300 cycles per minute
Protection Class: IP 65 with cable plug

Ordering Information: The document provides an ordering chart for valves with various specifications, including orifice size, port connection, Kv value, pressure range, seal material, and voltage/frequency options. All valves feature an ETFE body and PTFE-seat seal with EPDM or FKM.

Accessories: Cable plugs are available according to DIN EN 175301-803 Form B, with options for standard or LED versions. The delivery includes a flat seal and fixing screw.

Additional Notes: For special application conditions, consultation is advised. The document is subject to alterations, and further details can be found on the Bürkert website.

Catalog excerpts

DTS 1000010903 EN Version: G Status: RL (released | freigegeben | valide) printed: 13.07.2018 Type 117 is a normally-closed direct-act-ingplunger-type solenoid valve with PTFE-coated diaphragm. The diaphragm isolates the fluidfrom the solenoid system. When deenergized (in circuit function A)the valve is closed by spring action. When energized, the solenoid armature is drawnin 2/2-Way, G 1/8, UNF 1/4-28 FluidControl Systems against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil. burkerl FLUID CONTROL SYSTEMS • Compact design • Low electrical power consumption • Short response times • Hermetically sealing isolating diaphragm • Non-metallic valve internals

Open the catalog to page 1

DTS 1000010903 EN Version: G Status: RL (released | freigegeben | valide) printed: 13.07.2018 MaterialsOrdering chart for valves (other versions on request)All valves with ETFE-body (TEFZEL); without cable plug (see accessory); PTFE-seat seal with EPDM or FKM Circuit function

Open the catalog to page 2

DTS 1000010903 EN Version: G Status: RL (released | freigegeben | valide) printed: 13.07.2018 burkertOrdering chart Accessory (Cable plug acc. to DIN EN 175301-803 Form B (previously DIN 43650)) The delivery of a cable plug includes the flat seal and the fixing screw. For other cable plug versions acc. to DIN EN 175301-803 Form B (previously DIN 43650), see data-sheet Type 2507. To find your nearest Burkert facility, click on the orange box In case of special application conditions, Subject to alterations please consult for advice. © Christian Burkert GmbH & Co. KG

Open the catalog to page 3

All BÜRKERT FLUID CONTROL SYSTEMS catalogs and technical brochures

Archived catalogs

Type 6281
21 Pages
6281
13 Pages