Introduction
The document introduces the 2/2- and 3/2-way Flipper Solenoid Valve 6650, highlighting its ultra-slim design with a width of just 4.5 mm per station. It emphasizes the valve's outstanding flushability, low internal volume, high chemical resistance, and ultra-short response times.

Design and Performance
The valve is designed for miniaturized applications, offering fast-switching capabilities for precise dosing in aggressive environments. It is based on the innovative flipper principle, continuing the success of the valve type 0127 in a new design. The valve's compact size makes it ideal for applications requiring high fluidic performance in limited space.

Applications
The valve is suitable for use in medical engineering, clinical diagnostics, biotechnical research, and industrial microdosing technology. Its design allows for efficient dosing in 384-well micro-titer plates, enabling cost-effective use of chemicals and opening new possibilities for analytic and diagnostic procedures.

Technical Specifications

• Nominal Diameter: DN 0.4 and 0.8 mm
• Body Material: PEEK
• Seal Material: FFKM
• Media Compatibility: Resistant to neutral and aggressive fluids and gases
• Internal Volume: Approx. 30 μl
• Port Connection: Flange
• Electrical Connection: Plug with flying leads and power reduction electronics
• Operating Voltage: 24V with ±10% tolerance
• Power Rating: 5.7 W inrush (for < 5 ms), 0.7 W holding power
• Duty Cycle: Continuous operation with 100% duty
• Installation Position: Flexible, with uniform polarity when on block
• Protection Type: IP40
• Switching Frequency: Max. 80Hz, cooling plate needed for > 40Hz
• Response Time: Opening < 5 ms, Closing < 5 ms