Sample Gas Filter AGF-VA-350 Even if the particular contaminant has already been removed at the extraction point inside the through effective particle filtration gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination. Additional filters are therefore often installed at the point where the sample gas enters the analysis system and also before delicate system components. The filter housings must be made of corrosion-resistant, non-absorbent materials, easy to install and easy to maintain. They should further be compatible with various filter elements. Very quick and easy filter changes without tools Low dead volume Variable wall mounting via mounting bracket (Auto-) condensate drain option through connection thread (NPT 1/4”) inside the filter cover Model AGF-VA-350 has a small stainless steel housing and is suitable for operating pressures up to 350 bar.

Use in explosive areas (additional notices): The filter meets the fundamental safety requirements of Directive 94/9/EC and is suitable for use in Category 2G, Explosion class IIC areas. The filter is not marked, as it does not have an innate ignition source and Directive 94/9/EC therefore does not apply. Do not convey flammable gases explosion class IIC through the filter which may occasionally be explosive during normal operation. Be sure to observe the instructions in the respective operating instructions! Ambient temperature range when used in Ex areas: -5 °C ≤ Tamb ≤ 60 °C. Technical Data...