Catalogs >
Bühler Technologies >
Sample Gas Filter AGF - T 30

Sample Gas Filter AGF - T 30
2Pages

Catalog excerpts

Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyzer. Some applications require components made of highly corrosion resistant materials while others require inert materials. The AGF - T - 30 is made of Duran glass and PTFE and is an excellent solution for many corrosive applications and most reactive gas applications. The filter elements are made of sintered PTFE and have little or no absorption properties and these properties are wellknown. The versatile mounting bracket allows the filter installation in any flow direction. A variety of sizes and porosity allows use in almost any application. Element and casing provide low dead volume for rapid response. § Filter head made of solid PTFE § PTFE seal § Highly corrosion resistant § PTFE filter elements with pore size of 2 µm or 25 µm § Little or no absorption of trace gases § Fast response § Versatile mounting bracket Bühler Technologies GmbH D - 40880 Ratingen, Harkortstr. 29 Tel.: + 49 (0) 2102 / 49 89-0 Fax: + 49 (0) 2102 / 49 89-20 Internet: www.buehler-technologies.com e-mail: analyse@buehler-technolo

Open the catalog to page 1

Technical Data Filter head Filter bowl Seal Temperature max. Pressure max. Middle junction PTFE Glass Viton with PTFE jacket 100 °C 4 bar Application in explosive atmosphere (additional cautions): The equipment corresponds to the essential requirements of the directive 94/9/EC. Therefore they can be used in explosive atmosphere (Zone1 ; Group IIB ). Depending on the used filter element non-flammable gases and flammable gases (only temporary explosive in normal operation, Zone 1; Group IIB or IIC) can be led through these gas filters. Note indications of risk in the installation- and...

Open the catalog to page 2

Sample Gas Filter AGF - T 30 2Pages

Catalog excerpts

All Bühler Technologies catalogs and technical brochures

Sample Gas Filter AGF - T 30
2Pages