Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyzer. The AGF-PV-30 with the Bühler Unique QC bracket provides fine filtration and easy replacement of the filter media without the use of tools. This means the filter media can be changed in a matter of seconds. The QC bracket rotates 180° making the mounting of the bracket of the filter independent from the flow direction chosen. This versatile mounting feature makes installation problem-free. The filter head features an auxiliary port that can be used either for a bypass or for installation of a moisture detector. § Bühler Unique - QC bracket § Easy change of filter element without use of tools § Low dead volume for fast response § Versatile mounting bracket § Condensate drain option § Filter-head with additional port for bypass or moisture detector A variety of filter media is available to meet any specific application requirement. Bühler Technologies GmbH D - 40880 Ratingen, Harkortstr. 29 Tel.: + 49 (0) 2102 / 49 89-0 Fax: + 49 (0) 2102 / 49 89-20 Internet: www.buehler-technologies.com e-mail: analyse@buehler-technolog

Middle junction “in-out” Technical Data Filter head Filter bowl Seal Temperature max. Pressure max. Threads (A) PVDF Glas Viton í40 Application in explosive atmosphere (additional indications): The equipment corresponds to the essential requirements of the European Directive 94/9/EC. Therefore it can be used in explosive atmosphere (Zone 1; Group IIB ). Depending on the filter element used, non-flammable gases and flammable gases (only temporary explosive in normal operation, Zone 1; Group IIB or IIC) can be introduced through these gas filters. Note indications of risk in the installation and...