Sample Gas Coalescing Filter K-AGF-PV-30-A Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. One disturbance variable which must also be eliminated is aerosols. The aqueous suspended particles can easily be removed from the gas by coagulation using special filter matrices. During this process, the tiny aerosols accumulate on the fibres of the filter matrix through collision, forming drops increasing in size. Once large enough, the condensate which forms drains into the filter bowl and is then removed. Bühler Unique quick-release fastener Very quick and easy filter changes without tools Variable wall mount Additional connection inside the filter head (G1/4) for moisture detector or bypass Allows the connection of automatic condensate drains Model K-AGF-PV-30-A uses the AGF-PV filter series housing made from PVDF and glass and has the respective fittings to adapt it to the coagulation function. The easy installation and the Unique quick-release fastener are additional advantages of this model.

Use in explosive areas (additional notices): The filter meets the fundamental safety requirements of Directive 2014/34/EU and is suitable for use in Category 2G, Explosion class IIB areas. The filter is not marked, as it does not have an innate ignition source and Directive 2014/34/ EU therefore does not apply. Flammable gases, explosion class IIB or IIC, which could occasionally be explosive during normal operation may be conveyed through the filter. Be sure to observe the instructions in the respective operating instructions! Ambient temperature range for Ex area applications: -5 °C < Tamb...