Buhler’s AGF-FE-4 filters are designed for panel mounting. The main body is attached to the front panel. The filter bowl threads onto the main body and seals with an O-Ring. § Simple, panel-mount installation Changing filter media is done by simply removing the bowl. The dust loading on the filter is visible through the transparent bowl. The sample gas inlet and outlet are at the back side of the unit. § Large filter area § Easy filter replacement § Acid-resistant materials § Visual indication of filter condition Bühler Technologies GmbH D - 40880 Ratingen, Harkortstr. 29 Tel.: + 49 (0) 2102 / 49 89-0 Fax: + 49 (0) 2102 / 49 89-20 Internet: www.buehler-technologies.com e-mail: analyse@buehler-technolog

Mounting dimension Front panel Application in explosive atmosphere (additional indications): The filter inherits no ignition source and hence, carries no respective indication, the filter however, complies with regulation 94/9/EG and is applicable for category 2G, class IIB. Filter is applicable for the filtration of occasionally flammable gases according to class IIB. Note indications of risk in the installation and operation instruction of the filter! Ambient temperature range under hazardous conditions: -5 °C ≤ Tamb ≤ 60 °C Technical Data Surface area Pore size Dead volume Material - filter...