Buhler’s AGF-FA-5 filters are designed for panel mounting. The main body is attached onto the front panel. The filter bowl threads onto the main body and seals with an O-Ring. All wetted parts resist to aggressive media. The filter element consists of sintered PTFE Simple, panel-mount installation Large filter area Changing filter media is done by simply removing the bowl. The dust loading on the filter is visible through the transparent bowl. Easy filter replacement Acid-resistant materials The filter head features an auxiliary port that can be used either for a bypass or for installation of a moisture detector model FF-Au to detect moisture breakthrough. Filter-head with additional port for bypass, moisture detector or vent Bühler Technologies GmbH D - 40880 Ratingen, Harkortstr. 29 Tel.: + 49 (0) 2102 / 49 89-0 Fax: + 49 (0) 2102 / 49 89-20 Internet: www.buehler-technologies.com e-mail: analyse@buehler-technolog

Dimensions mm (approx. inch) 73 (2.87) 25 (0.98) Application in explosive atmosphere (additional indications): The filter inherits no ignition source and hence, carries no respective indication, the filter however, complies with regulation 94/9/EG and is applicable for category 2G, class IIB. Filter is applicable for the filtration of occasionally flammable gases according to class IIB. Note indications of risk in the installation and operation instruction of the filter! Ambient temperature range under hazardous conditions: -5 °C ≤ Tamb ≤ 60 °C Technical Data Surface area Pore size Dead volume...