Catalog excerpts
BKF Off-line filter / cooler unit § Compact design § Easy installation § Efficient plate heat exchanger Bühler Technologies GmbH D - 40880 Ratingen, Harkortstr. 29 Tel.: + 49 (0) 2102 / 49 89-0 Fax: + 49 (0) 2102 / 49 89-20 Internet: www.buehler-technologies.com e-mail: fluidcontrol@buehler-technologies.com
Open the catalog to page 1
Why off-line filters? Experience shows off-line filtration has very effective results for many applications in fluid power and lubrication systems. Independent from pressure ripples and flow surges, off-line filters develop the best possible retention of particles and offer the highest possible dirt holding capacity. In combination with other system components, eg. coolers or heaters, installation cost and space requirements can be minimized. Why Bühler? The Fluidcontrol division of Bühler has focused on the fluid power and lubrication industries for a long time and has developed an...
Open the catalog to page 2
Dimensions (mm) Mounting for heat exchanger Mounting pattern Contamination indicator (Option) Plate heat exchanger BWT B08X020 Ø9 Installation hints: - All threads according to DIN EN ISO 228 - If installed on the side of a reservoir make sure that the pump gets free flow of oil in the suction line - Make sure that indicator is visible when installing on tank top Please indicate with order Flow rate Model BKF 18 - without contamination indicator NBR BKF 18 - mechanical contamination indicator NBR BKF 18 - electric contamination indicator NBR BKF 30 - without contamination indicator NBR BKF...
Open the catalog to page 3
Plate heat exchanger BWT B25x30-S Contamination indicator (Option) Drain plug for filter housing Installation hints: - All threads according to DIN EN ISO 228 - If installed on the side of a reservoir make sure that the pump gets free flow of oil in the suction line - Make sure that indicator is visible when installing on tank top Please indicate with order Flow rate Description BKF 60 - without contamination indicator NBR BKF 60 - mechanical contamination indicator NBR BKF 60 - electric contamination indicator NBR BKF 90 - without contamination indicator NBR BKF 90 - mechanical...
Open the catalog to page 4
G1/4 optional port manometer or pressure indicator G1/4 optional port manometer or pressure indicator Planning hints Installation Location When mounting the BKF outdoors adequate weather protection is necessary. Leave access for servicing. Mounting BKF’s are mounted with four bolts. The strength of the base has to be strong enough to carry the BKF. Tubing Tubing to the system has to be free of tension and vibration. This will be maintained by using flexible hoses. Take care of local laws concerning environment protection due to accidental leakage (for example, by using drip pans).
Open the catalog to page 6All Bühler Technologies catalogs and technical brochures
-
Gas cooler series TC-MINI6 Pages
-
sample gas probe GAS 222.102 Pages
-
Oil/air cooler BLK ATEX-3GD7 Pages
-
Off-line cooler BNK ATEX-2GD6 Pages
-
Off-line cooler BNK ATEX-3GD6 Pages
-
Circular pumps BFP7 Pages
-
Circular pumps BFP ATEX-2GD8 Pages
-
Buhler catalogue for Fluid Control434 Pages
-
Bühler Gas Analysis catalogue394 Pages
-
Safety Flow Meter S-SM2 Pages
-
Controllers2 Pages
-
Flow Meter SM-62 Pages
-
Panel Filter AGF - FA - 52 Pages
-
Panel Filter AGF - FE 42 Pages
-
Panel Filter AGF - FE2 Pages
-
Sample Gas Filter AGF - T 302 Pages
-
display and control unit2 Pages
-
VSA 24-DM / DH / DP2 Pages
-
Oil/air coolers BNK7 Pages
-
BWT platecooler series8 Pages
-
Capacity sensor VSA 24-SM2 Pages
-
Nivotemp 61-0 WW series2 Pages
-
Water alarm WW 6 series2 Pages
-
GAS 222.202 Pages
-
BNF off line filter6 Pages
-
NV 716 Pages
-
NT 67 XP3 Pages
-
NT 619 Pages
-
NT M4 Pages
-
SM series2 Pages
-
P 1.13 Pages
-
AHF2 Pages
-
BF 2-S2 Pages
-
AGF2 Pages
