Catalogs >
Bühler Technologies >
display and control unit

display and control unit
2Pages

Catalog excerpts

Display and control unit The Buhler control and display unit DTX-P features a rugged plastic housing and a protection class of IP 65 on the panel side making it an excellent solution for industrial applications. The 4-20 mA analogue input combines it with our level- and temperature controls like Nivotemp, Nivovent and Thermolog as well as with our Fluidcontrolterminals. The unit can be adapted to the individual application by inserting special pc boards. These pc boards can be exchanged anytime lateron if required. Standard variations for the DTX-P are: Analogue output 4-20 mA, two change over relays, four NO relays and either four NPN or PNP outputs. An interface PC board for remote programming is also available. ■ 5-digit, 14mm LED display back gruond illuminated ■ Input signals 0-20 mA, 4-20 mA or 0-1 Ov DC optional ■ Optional pc boards. Up to four switch points, 0/4-20 mA or 0-10 V analogue outputs, RS 232 interface ■ Easy to programme either on site or remotely ■ Signal linearisation programmable in 16 steps Buhler Technologies GmbH Internet: www.buehler-technologies.com e-mail: fluidcontrol@buehler-technologies.com

Open the catalog to page 1

technical data cut-out of the control panel dark red, shock-proof plastic housing. Fixing by mounting frame with terminal screw. five-digit display with 14 mm high red LED The following standard signals are possible. The range will adjusted in the programming. The accuracy in the following range table is stated in percent of indication value. The protection complies the max. permissible input signal. power supply: 3 programmable inputs are occure. They are adjustable by bridges PNP- or NPN-switching. stronghold terminal strip operation: 0...+50°C; with 3 cards 300 g (without plug-in cards)...

Open the catalog to page 2

display and control unit 2Pages

Catalog excerpts

All Bühler Technologies catalogs and technical brochures

display and control unit
2Pages