Hydrophobic and Oleophobic Coatings

Leybold Optics offers different Hydrophobic and Oleophobic coating solutions to cover all different needs in the ophthalmic market. Super Clean This high-end Coating Material offers highest contact-angles against water and oily fluid and adds outstanding sealing and smoothing properties to the product. King Clean This Coating Material combines the very good oleophobic and regular hydrophobic- properties. It’s sealing the surface of the coated lenses and adds easy to clean properties to the surface, The Surface is smoothed and the lens user will not determine any difference to a Premium Superhydrophobic...

Hydrophobic properties Olephobic properties

Wear resistance Abrasion resistance Cheescloth 800g; D=40mm; 240Cycl/min SuperClean Abrasion Cycles Surface smoothing Sliding angle on dry chees cloth SuperClean

Application notes Evaporation from EBG Ramp / Hold time: Evaporation start after shutter open Evaporation from Boat Evaporation values differ by selected boat guide lines on request Thickness settings Super Clean: Density 1g/cm³ / Tooling 100% / Thickness 20-25 nm Density 1g/cm³ / Tooling 100% / Thickness 20-25 nm Density 1g/cm³ / Tooling 100% / Thickness 4-12 nm Recommended thicknesses for Evaporation source in centre position, For Boat evaporation on 1/2 radius position, thicknesses are ~ 50% reduced

Super Clean Type A1.1 Part no: 102065165 CCSII (incl.Flip-over), BOXER, SYRUS III Type A1.2 Part no: 102123730 BOXER (incl.Flip-over), SYRUS 1350 Type A2.1 Part no: 102065192 Table Topcoater TC II King Clean Part no: 102136373 Regular Hydrophobic D=6 x 4 mm Part no: 10084009 CCSII (incl.Flip-over), BOXER, SYRUS III, Syrus 1350 Liners: Part no 10024464 CCSII, BOXER, SYRUS III, Syrus 1350 Part no 10080632 CCSII before 2004

Contact Information Leybold Optics GmbH Customer Support Siemensstrasse 88 63755 Alzenau Fax:+49-6023-500-0 +49-6023-500-150 [email protected] www.leyboldoptics.com