Catalogs >
Bühler Group >
SpeedmixTM Batch Mixer

SpeedmixTM Batch Mixer
8Pages

Add to favorites

Catalog excerpts

SpeedmixTM Batch Mixer. AHML. Innovations for a better world.

Open the catalog to page 1

SpeedmixTM Batch Mixer. AHML. SpeedmixTM. Flexibility and optimal mixing results. Application. The Speedmix™ is suitable for processing all free-flowing dry solids encountered in the feed and food industries as well as in the chemical engineering industry. Depending on operation, it allows mixing with different loading degrees. In processing dry solids, the same mixing quality is achieved with any value between 10 and 100 % of the maximum loading degree. In addition, a soft-starter allows the machine to be started under full load. The Speedmix™ is available in versions holding between 1,000...

Open the catalog to page 2

SpeedmixTM Batch Mixer. AHML. High sanitation standards. Mixing with very low residues. Low cross-contamination. The interior of the mixer and the mixer paddles allow quick and easy cleaning. Moreover, the outlet opening extending across the full length of the trough in conjunction with the ideal trough geometry minimize product residues (dry ≤ 0.05 %) and thus diminish the risk of cross-contamination. The twin outlet gates in all design versions are made of non-corroding steel. Customer value. –– Short mixing time of 90 s –– Consistent mixing quality CV 2 – 5 % –– Short discharge time ≤...

Open the catalog to page 3

SpeedmixTM Batch Mixer. AHML. Minimum maintenance. Smartly designed wear parts. Low maintenance requirement. Worn-down paddles can be individually readjusted or replaced. This significantly reduces the cost of maintaining the mixing tool. In addition, the shaft mounted gearmotor drive does not require any maintenance apart from oil changes, and only a short time is required for exchanging the split shaft seals. Furthermore, the large lateral door offers easier access to the interior of the mixer for maintenance and cleaning.

Open the catalog to page 4

SpeedmixTM Batch Mixer. AHML. Liquids addition. Depending on the specific nature of the material and the liquid to be mixed, the Speedmix™ is capable of admixing ≤ 5 % liquid. Spray systems purpose-designed for this mixer are available: –– Single spray pipe for addition of 1 liquid. –– Twin spray pipe for simultaneous addition of 2 liquids. The spray pipes are equipped as standard with electrical heating pads. The heat reduces the viscosity of the liquid as a function of its specific characteristics and prevents chocking of the lines and nozzle, reducing the liquids injection time. To...

Open the catalog to page 5