VAC Products Range
12Pages

Valves and Manifolds | Double Block and Bleed Valves Monoflange Valve | Chart Recorders Calibration Equipment | Positioners Accessories A global supplier of quality instrumentation/piping specification valves through product design and reliability for total customer satisfaction

Four essential reasons to specify Budenberg instrument valves Gland/Stem Leakage - ‘Banished’ Adjustable, dynamically responsive multi ring gland “sandwich” resists all operating pressures and processes. Budenberg offer 100% gland integrity for the lifetime of every valve. Super finished stem diameter also gives low operating torque. Body/Bonnet Joint Failure “Eliminated” Over designed, high strength bonnet threads, combine with “soft” parent metal bottom seal to give thread closure protection and further enhance environmental safety. Guaranteed. Thread/Leak Failure - “Solved” Precision cut...

Needle Valves and Manifolds Budenberg valves and manifolds are designed to a high specification that incorporate a wealth of design features as standard: Needle Valves • Male x Female or Female x Female variants • Screwed connections from ¼” to 1” NPT or BSP • Male and female socket weld connections • 316 Stainless Steel as standard but other materials are available Gauge Valves • Gauge Vent Valve with ¼” NPT vent port • Gauge Multi port valves with three outlet connections • Male x Female or Female x Female variants 2 Valve Manifolds • Remote Mounting variants • Direct coupling variants •...

Four essential reasons to specify Budenberg ball valves Body/Adaptor Joint Failure ‘Eliminated’ 2 piece not 3 piece design gives greater strength and integrity. Over designed high strength adaptor threads, combine with “soft” parent metal bottom seal to give closure thread protection and ensures environmental safety. Optional secured end further enhances the guarantee by eliminating risk of accidental disassembly. Gland/Stem Leakage - “History” Budenberg incorporate the same dynamic multi ring gland system as in the needle valve, which when combined with the anti blowout back seating stem,...

Ball Valves Budenberg ball valves and mainfolds carry their standard features and benefits throughout the range, from standard Isolation units to complex assemblies and bespoke customer designs. Ball Valves All Ball valves incorporate the same design features as standard: • 6,000 psi or 10,000 psi CWP • Two piece design • Fully back seating – in bonnet with anti- blowout stem • Multi stage ‘dynamic’ stem packing in PTFE • ‘Built in’ cavity relief • True Metal to metal body seal • Guaranteed 4x safety factor • Compliant to NACE MR 01-75 (latest version) • Pressure / Temperature ratings as...

Double Block & Bleed Valves The Budenberg range of Double Block and Bleed Valves incorporate all the technical features of our Ball and Needle Valves into a single housing thereby reducing leakage paths and installation times. All units are designed to conform to the requirements of ASME VIII Div 1, ASME B16.34 and MSS SP-99. Budenberg can provide units from our standard range or design and manufacture units to meet the individual user or application requirements Model 93 Barstock DBB Manifold • Compact design • Double Block and Bleed configuration • Barstock Body incorporating all valve...

Monoflange Valves The Budenberg range of Monoflange Valves provide a very compact solution to instrumentation applications providing a ‘close coupled’ connection between the process and the instrumentation, therefore reducing leak joints and weight. We have a very comprehensive range of standard configurations that are available in short lead-times but we can also design and manufacture units to meet the individual user or application requirements. Model 6M – Monoflange with OS&Y Primary Isolation • 6M – Single Block Isolation Valve • 6MB – Single Block and Bleed Valve • 6MBB – Double Block...

Injection / Sampling DBB Valves All the Budenberg ranges of DBB Valves and Monoflanges can be fitted with a quill that will facilitate the taking of samples or injection of fluids directly into the process stream even at full system pressure. The quill dimensions are application dependent and are designed to overcome any issues with Vortex Shedding that could occur. Injection / Sampling Valves • All quills are designed as an integral part of the valve design • Injection probes with a sealed end with an 1/8” diameter hole in the side wall but other configurations can be supplied • Sampling...

Chart Recorders Budenberg’s range of Pressure and Temperature Chart Recorders primarily designed for Offshore applications such as pipeline pressure testing. Chart Recorders • Pressure only versions in ranges from 0-1 bar to 0-7,000 bar (0-100,000 psi) • Temperature version in ranges from 0 to 80 Deg C to 0-600 Deg C • Dual channel versions in either pressure, temperature or pressure and temperature • Accuracy is +/- 1% with an option for +/- 0.5% • Chart rotation – 2, 4, 8, 12 or 24 hour, 7 day • 240mm diameter charts • Heavy Duty case in either 304 or 316 Stainless Steel • Free standing...

History Of Budenberg Here are some milestones in our history No one can deny the tradition of quality and innovation that engineers associate with Budenberg. The rich history of our company helps to enforce the significant brand strength that makes us the first name that comes to mind when quality pressure & temperature instruments are needed. Germany 1850: Arnold Budenberg laid down the foundations of the company when he took out, with Ernst Schaffer, a patent on a diaphragm gauge. 1852: Arnold Budenberg came to sell Pressure Gauges in England and set up operations in Manchester in 1854....