Catalogs >
Budenberg >
V100E-IS

V100E-IS
2Pages

Catalog excerpts

Model: V100EIS VALVE ACCESSORIES & CONTROLS INTRINSICALLY SAFE POSITIONER A line of pneumatic valve positioners incorporating over sixty years of design, manufacturing and marketing expertise, creating one of the most durable, reliable instruments on the market. This positioner can be ordered with either European or US certification on the I/P converter thus allowing it to be used in hazardous locations. Certificates from CSA, FM and ATEX are available. Accessories in the way of gauges, feedback modules or a raised indicator can be added in a matter of minutes. Maximum modularity equals maximum flexibility and with a simple design and quality components, the performance is a maximum as well. Input Signal 4-20 mA ( Ri<250 ohms ) Thread sizes Air connections Electrical entry Gauge ports Linearity Error <1.0% FS Ingress Protection IP66 (NEMA 4X) Surface Finish Powder Polyester Options Various Spindles for different actuators Various cams Gauges Indicators Pilot Valves Temperature Range Depending on electrical rating -40 to +85 Celsius (-40 to +185 Fahrenheit) Certification FM CL I-II-III / DIV I / Grp A B C D E F G CSA CL 1 DIV 1 Grp ABCD; CL 11 DIV 1 Grp EFG; CL 111 CL 1 DIV 2 Grp ABCD; CLI 1 DIV 2 Grp EFG ATEX II 1G Eex ia IIC T4-6 Benefits Simple calibration. With the non-interactive zero and span adjustment and the external zero adjustment, calibration is simple and time saving. Flexibility. One housing for pneumatic or electro-pneumatic. The I/P can be installed or removed at any time. Multiple mounting capability. Standard indicator allows for air to open or air to close operation. Flat or raised indicator Benefits Maintenance friendly. The pilot valve assembly can be cleaned by removing one screw and can only be installed one way - the correct way. The gauge block is standard. I/P test point positioner loop testing. Durable. Cast aluminium, polyester coated housing. Stainless steel retained fasteners. Double locked stainless steel cam. Quality internal parts. Unique electrical compart- available. F05 standard housing with changeable drives. ment fitted with an o-ring is pressure sealed by the cover.

Open the catalog to page 1

Positioner shown with Pressure Gauges. Model No V100EIS Ordering Specification Threads 1/4G / M20 NPT / NPT (Others available) Rotary Namur Long Linear Short Linear Front Cover 90 Degree 60 Degree 45 Degree 30 Degree Blank Indicator Flat Arrow Raised Cam Linear 90/180 Degree Linear 30/60 Degree (Others available) Example Order VAC Positioner with Thread 1/4G, Rotary Namur Drive, 90 Degree Front Cover Flat Arrow Indicator with a Linear 90 / 180 Degree Cam Specifications and dimenions in this leaflet, are subject to change without prior notice. Budenberg Gauge Co Ltd 4 Gilchrist Road....

Open the catalog to page 2