Catalogs >
Budenberg >
Standard Process Gauge

Standard Process Gauge
2Pages

Catalog excerpts

BOURDON TUBE PRESSURE GAUGE PREMIUM INDUSTRIAL SERVICE An impressive technical specification and wide range of standard features make the PREMIUM the obvious choice for a wide range of process and engineering applications. Embodying an all 316 Stainless Steel construction, the 966GP incorporates a solid baffle wall and blow out back for operator protection and standard features such as IP67 environmental protection , not normally available on comparative units. An extensive choice of options can be fitted to any standard unit whilst fully custmised units can be manufactured to suit any customer's requirements Monel wetted parts, can be provided for customers who seek units to meet NACE-01-75 specification see 966MGP. Dial White Anodised Aluminium marked in black finish Single or dual scale Mounting Direct, Surface and Flush Pointer Stainless steel coloured black Options: Micrometer adjustable pointer Case & Bezel Rugged one-piece full Safety Pattern case to S3 standard with a solid baffle partition wall and full blow out back manufactured in 1.6mm thick, 316L stainless steel. Movement Stainless Steel Construction Option : Viscous Damped movement to overcome the effects of minor pressure pulsations Scale Ranges 0 to 600 mbar to 0 to 1400 bar Pressure Equivalent units of pressure / vacuum available Single and dual scales are available Window 3mm Laminated Safety Glass (Standard) Option: Acrylic Plastic Window Pressure Element ≤80 Bar –316 Stainless Steel Bourdon Tube ≥81 Bar - 316 Stainless Steel Coil Environmental Rating IP67 as defined in EN 60 529 Overload Units withstands overload pressure up to 130% of FSD Overload & vacuum stops are fitted on the movement Traceability All instruments are individually calibrated and have an unique Serial Number printed on the dial. A Certificate of Conformity Traceable to National Standards is Supplied Free of Charge Option: Mechanical overload clamps fitted internally to enable units to withstand up to 3x the max scale reading Pressure Connection in 316 Stainless Steel 3/8”, 1/2” BSP 1/2” NPT Other connections available, contact our Sales Dept for details Certification available BS EN 10204 3.1B Material Certification Point by Point Test Certificate Safety All units are manufactured to comply with EN 837-1, S3 specification and other regulatory standards including PED. Accuracy Class CL:1 1.0% of FSD as defined in EN837-1 Option: 0.5% of FSD as defined in EN837-1 Installation instructions Refer to EN 837-2 Temperature Operating: -20 to +90 ºC Storage: -40 up to +100 ºC Options: for lower or higher operating temperatures, please contact our Sales Office Temperature Effect Variation in indication caused by temperature shall not exceed ± 0.04 x (t2 – t1)% of the span where: t1 is the reference ambient temperature in degrees Celsius t2 is the ambient temperature in degrees Celsius

Open the catalog to page 1

Flush Mounting CUmp Fixed 11/966GP Flush Mounting Screw Faec 11/966GP Element: 316L Stainless Steel Window : Acrylic Plastic Window Pointer: Micrometer adjustable Model 270 Dials : Special sectors, Logos etc. For high temperature applications such as steam, see our range of syphons and adaptors. - See separate Datasheet. We can supply Needle, Ball or 2 Valve manifolds for the Model 966GP - See separate Datasheet. The manifolds in addition to allowing the instrument to operate normally allows the following: - a). Checking of gauge zero at line pressure. b). Complete isolation of the...

Open the catalog to page 2