Catalogs >
Budenberg >
High Pressure Small Dial Gauge 15H

High Pressure Small Dial Gauge 15H
2Pages

Catalog excerpts

SMALL DIAL - HIGH PRESSURE INDUSTRIAL SERVICE GAUGE The model 15H is manufactured to meet the demand for small high quality gauges designed for applications using gases, water or any liquid that does not attack brass and bronze or Stainless Steel. The one piece polycarbonate case with integral window forms a solid baffle in front of the Bourdon tube and incorporates a full diameter stainless steel blow-out back so that in the event of a tube failure through corrosion, explosion or gross over pressure any vapour or debris is vented from the back of the case. This gauge is designed for direct mounting on to the process pipe work and comes with a grey inner sleeve to give a grey colour to the side of the case. For oxygen applications these gauges must be manufactured to ensure they are entirely free from oil and grease. Size 63 mm & 80mm Dial diameter Mounting Direct Case & Bezel One Piece Polycarbonate, Safety Pattern case Scale Ranges Above 60 bar up to 700 bar Equivalent units of pressure / vacuum available Single and dual scales are available Pressure Element 316 Stainless Steel helical coil brazed to the body and with welded end piece Overload Up to 115% Pressure Connection 1/4” BSP as Standard 1/8", 1/4” & 3/8" BSP & NPT are also available Accuracy Class CL:1 1.0% of FSD as defined in EN837-1 Temperature Operating: -20 to +90 ºC Storage: -40 up to +100 ºC Options: for lower or higher operating temperatures, please contact our Sales Office Dial White Anodised Aluminium marked in black finish Option: Dual scale, colour bands & sectors Customisation with Company Name & Logo also available Pointer Stainless steel coloured black Movement Brass Construction Option : Viscous Damped movement to overcome the effects of minor pressure pulsations and vibrations Window One Piece Polycarbonate Environmental Rating IP54 as defined in EN 60 529 Traceability All instruments are individually calibrated and have an unique Serial Number printed on the dial. A Certificate of Conformity Traceable to National Standards is Supplied Free of Charge Certification available BS EN 10204 3.1B Material Certification Point by Point Test Certificate Safety All units are manufactured to comply with EN 837-1, S3 specification and other regulatory standards including PED. Installation instructions Refer to EN 837-2 Temperature Effect Variation in indication caused by temperature shall not exceed ± 0.04 x (t2 – t1)% of the span where: t1 is the reference ambient temperature in degrees Celsius t2 is the ambient temperature in degrees Celsius

Open the catalog to page 1

Model No 63mm Polycarbonate Case 80mm Polycarbonate Case Model No 63mm Polycarbonate Case 80mm Polycarbonate Case Options Case : Mounting : Threads : Dials : Customer Name or Logo See other Datasheets for various mountings NPT available Colour sectors Accessories For high temperature applications such as steam, see our range of syphons and adaptors. – See separate Datasheet. Brass shut off cocks Specifications and dimensions in this leaflet, are subject to change without prior notice.

Open the catalog to page 2