Model: CHECK VALVE NON - RETURN CHECK VALVE HIGH PRESSURE The Budenberg Check Valve was designed to meet the demand from applications where high pressures and arduous duties are standard. The valve permits gases and liquids to flow only in one direction, thus preventing the process flow from reversing. The process flow in the desired direction opens the valve, and during the reverse flow the poppet is forced back into its seat closing the valve, which provides a total non-return of flow or The poppet-check design of our valve utilises a spring loaded poppet resting in a seat ring as the closure element. It incorporates a heavy duty spring for repeatability and a prolonged life. These Check Valves are also known in different industries as "Non-Return" and "Directional Control" valves. Body - 316 Stainless Steel as standard Spring - 316 Stainless Steel Other materials available on request. Connection Size Adaptors available for other thread configurations Pressure Ranges Cracking Pressure 100% Pressure / Hydrostatically tested Each valve is stamped with unique trace- code to enable us to trace back to the original mill certificate. Therefore when requested each batch can be supplied fully in accordance to EN 10204 3.1b Customer names etched on the body, special designs undertaken, please contact or Sales Office.

Model : CHECK VALVE Dimensions Model No Check Valve A 75mm B 28mm Accessories Adaptors We have a range of Parallel and Taper threaded adaptors to fit the Non-Return Check Valve - See Adaptors Datasheets Valves We have a range of Needle and Ball Valves that are complimentary to the Non-Return Check Valve - See Valve Datasheets Applications Pumping Systems - where a backflow of pressure can cause damage Hydraulic cylinders - where a reduction in pressure can cause the hydraulic cylinder to withdraw Vent Valve - to purge a system Contamination prevention - where a backflow of pressure can cause...